Rapid remediation using polyurethane foam/resin grout in Malaysia
Journal Title: Geotechnical Research - Year 2017, Vol 4, Issue 2
Abstract
Rapid remediation using polyurethane foam/ resin grout in Malaysia
Authors and Affiliations
Ismacahyadi Bagus Mohamed Jais
Centrifuge tests on strip footings on sand with a weak layer
Tests on small-scale physical models of a strip footing resting on a dense sand bed containing a thin horizontal weak soil layer were carried out at normal gravity (1g). The results, reported in a companion paper, point...
Benefits of pre-loading temporary props for braced excavations
Using soil profiles typical of excavations in London, UK and Dubai, UAE calculations have been carried out to compare the performance of temporary steel and proprietary hydraulic propping. Numerical modelling indicates t...
Resistivity profiles of Perth soil in Australia in leak-detection test
The use of a suitable leak-detection system for the prevention and mitigation of pollution due to lining system failures is integral to the proper management of landfill facilities. This paper briefly summarises various...
Measurement, interpretation and recommended use of laboratory strength properties of fibrous peat
Peat deposits are complex natural formations encountered in many geographical areas. Peat itself is considered as a challenging geomaterial, with many aspects of its behaviour seemingly remaining enigmas. This state-of-t...
Impact of highly weathered geology on pipejacking forces
For the Kuching Wastewater Management System Phase 1 project in Kuching, Malaysia, 7ยท7 km of trunk sewer lines were constructed in the highly fractured, highly weathered Tuang Formation using a pipe-jacking method. The p...