РАЗРАБОТКА ТЕХНОЛОГИИ ОБРАЗОВАНИЯ САМООРГАНИЗУЮЩИХСЯ ЕСТЕСТВЕННО-ЗАЩИТНЫХ ПОКРЫТИЙ В МЕЖКОНТАКТНОМ ПРОСТРАНСТВЕ ПАР ТРЕНИЯ В ПРОЦЕССЕ РЕЗАНИЯ
Journal Title: BULLETIN of Kyiv Polytechnic Institute. Series INSTRUMENT MAKING - Year 2018, Vol 56, Issue 56
Abstract
As a result of scientific and experimental research by modeling the cutting process as a controlled thermodynamic system, the essence of self-organizing new submicrostructures on thin contact surface layers of the tool is revealed. A technological method has been developed for the formation of an intercontact natural protective “white” layer. Investigated the formation mechanism of a “white” layer – a new composite material in the inter-contact space, plays the role of a protective coating, which is explained as a result of existing plastic deformations, normal and tangential stresses, high dislocation density and temperatures in thin surface layers of materials in contact pairs – a cutterdescending chip as well as diffusion of alloying elements W, V, Сr, Mo, Co and strengthening carbide and intermetallic particles WC, VC, MoC, (FeCo)7W6, (FeCo)7Mo6 in the intercontact formation, consisting of hindered strongly deformed, cold-worked, amorphized nanoparticles of the processed material from steel 45, attached to the roughness of the front contact surface of tools from high-speed steels R6M5 and B14M7K25. The “white” layer formed in the contact area of the front surface of the instrument plays the role of a heat insulator and a protective coating, preventing direct contact of the outflow of the material being processed with the tool. Experimentally has been established an additional reserve for increasing tool wear resistance by controlling the interaction of crystal lattices and self-organization in the contact space of friction pairs by new structure formations under the influence of normal and tangential stresses, temperatures, plastic deformations and diffusion with the creation of a naturally protective self-organizing “white” layer playing the role of a heat insulator and protective coatings. Determined the regularities of the formation for protective coatings stagnant and “white” layers in the intercontact space of friction pairs during the cutting process, and revealed the mechanism for creating intellectual coatings on the tool contact surfaces, which react to changes in thermodynamic characteristics and which can be used in the cutting process itself. A combined resource-saving technology has been developed to increase the microhardness, strength, wear resistance and service life of the tool from high-speed steels R6M5 and carbon-free high-speed alloys with intermetallic hardening with cutting tools of type В14М7К25 when machining steel 45.
Authors and Affiliations
Artak Sahradyan, Violeta Simonyan, Sonya Vardanyan
Keywords
Related Articles
- EP ID EP568409
- DOI 10.20535/1970.56(2).2018.152455
- Views 170
- Downloads 0
ПОБУДОВА МОДЕЛІ П'ЄЗОЕЛЕКТРИЧНОГО ДИСКОВОГО ТРАНСФОРМАТОРА З КІЛЬЦЕВИМ ЕЛЕКТРОДОМ В ПЕРВИННОМУ ЕЛЕКТРИЧНОМУ КОЛІ
The piezoceramics has applications in various fields of engineering and technology because of its unique properties. The relevance of the use of various functional elements of piezoelectronics in radio electronics, infor...
ПРИСТРІЙ ДЛЯ РЕЙТРЕЙСИНГОВОЇ АБЕРОМЕТРІЇ ОКА
In ophthalmology for the diagnosis with the purpose of further treatment of eye diseases worthwhile aberrometers are used. For objective research of the optical system of the eye, methods of simultaneous projection of th...
МОДЕЛЮВАННЯ ТА ОЦІНКА ВПЛИВУ НАДВИСОКОЧАСТОТНОГО ВИПРОМІНЮВАННЯ НА БІОЛОГІЧНІ ТКАНИНИ
The influence of electromagnetic extremely high-frequency (EHF) millimeter-wave radiation on biological tissues was explored and its thermal effects were evaluated. An assessment of the EHF-radiation intensity of the Por...
ВИЗНАЧЕННЯ ГЛИБИНИ ПРОНИКНЕННЯ ФАРМАКОЛОГІЧНИХ ПРЕПАРАТІВ У БІОЛОГІЧНИЙ ОБ`ЄКТ ПРИ УЛЬТРАФОНОФОРЕЗІ
In the article are given the results of studying the effect of ultrasonic vibrations of varying intensity, frequency and waveform on the depth of penetration of pharmaceuticals over time into biological tissue. Establis...
АНАЛИТИЧЕСКИЙ РАСЧЕТ ГЛАДКОСТИ СОПРЯЖЕНИЯ ПОВЕРХНОСТЕЙ И ТРАЕКТОРИЙ ФОРМООБРАЗОВАНИЯ ДЛЯ ИХ ОБРАБОТКИ НА СТАНКАХ С ЧПУ
The purpose of this work is to improve the cam mechanisms qualities under operating conditions. For present purpose, the task of determining the condition of smooth conjugation of the screw and radius surfaces of the cam...