REACTION KINETICS OF ACETIC ACID WITH ETHANOL TO ETHYL ACETATE WITH SULFURIC ACID CATALYST
Journal Title: Engineering and Technology Journal - Year 2023, Vol 8, Issue 06
Abstract
Ethyl acetate is an ester of ethanol and acetic acid. This compound is a colorless liquid with a characteristic odor. Ethyl acetate is widely used as a solvent because of its high solubility. The manufacture of ethyl acetate (ethyl ester) is referred to as the esterification process. This esterification reaction is an exothermic reaction, is reversible and generally runs very slowly so it requires a catalyst to obtain maximum ester. Domestic demand for ethyl acetate is increasing, while production in Indonesia is still lacking. Reactor design requires a reaction mechanism and kinetic data in the form of reaction rate equations and reaction rate constants. This study aims to determine the kinetics of the etherification of acetic acid presented in the form of the reaction rate equation, the value of the reaction rate constant, and the reaction equilibrium constant. In addition, this research also studied how the influence of sulfuric acid catalyst on the reaction rate constant and the reaction balance. The esterification reaction was carried out in a batch reactor. 99% acetic acid and H2SO4 catalyst whose concentrations are varied, are mixed in a reactor equipped with a magnetic stirrer which is operated at 400 rpm, then 96% ethanol is poured with a volume ratio of 1:1 to acetic acid, 5 mL of sample is taken to analyze the remaining acid after The reaction takes place, every certain time interval a sample is taken to be analyzed until an equilibrium point is obtained. From the results of this study it can be concluded that the esterification reaction of acetic acid with ethanol to produce ethyl acetate is a second order reaction with the reaction rate equation (-rA) = k1CACB – k2CCCD. By using a reaction temperature of 34oC and a stirring speed of 400 rpm, the best conditions were obtained using a catalyst of 5.3% by volume, with the reaction rate constant to the right (k1) being 0.014 L/(gmol min), the value of the equilibrium constant (K=k1/k2) is 5.51 and the balance conversion is 77%.
Authors and Affiliations
Murni Yuniwati , Bambang Kusmartono , Muhammad Yusuf , Raditya Yoga ,
CONDENSATION RATE ENHANCEMENT OF THE INCLINED CONDENSER IN THE SOLAR STILL CONNECTED WITH A SOLAR WATER HEATER
One method to increase the fresh water productivity of the basin type stills is to increase the condensation rate of their condensing surfaces. A basin type still with an aluminum condenser was fabricated and tested in t...
Proposed Improvement of Facility Layout to Optimize Material Handling Costs with ARC, AAD, ARD Approach at PT. Plating Services
In the industrial world, the planning and layout of factory facilities is very important in realizing efficiency and smoothness in work. Improper layout can make material transfer time ineffective because the distance be...
Strategy for the Increase of the Catch Landed in the Fishing Port of Sibolga Nusantara, Indonesia
The Sibolga Islands Fishing Port (PPN) has experienced a decrease in the level of operations, as indicated by a decrease in the number of vessel visits, fishing logbook reports, and the amount of fish production landed....
Comparative Corrosion Inhibition Test Study in Phosphate Buffer Saline for 316L Stainless Steel with Electrospun PCL Coating with Different Additives
In this study, ten different contents of PCL-based nanofibers containing ZnO, CuO, NiO, 2F TSC, 4F TSC and graphite additives (PCL+Graphite+CuO+NiO+ZnO, PCL+ZnO+Graphite, PCL+ZnO+NiO+CuO, PCL+ZnO, PCL+Graphite, PCL+ZnO+2...
The Impact of Contract Changes on Construction Project Implementation Based On Contractor Perceptions in Indonesia
A construction contract is an agreement between service providers and service consumers for the execution of construction work, and those who violate it face penalties. Based on the opinions of contractors, this study at...