Recovery of Pyrolytic Oil from Thermal Pyrolysis of Medical Waste
Journal Title: Журнал інженерних наук - Year 2018, Vol 5, Issue 2
Abstract
In this paper, potential of beneficial products recovery was investigated from plastic medical waste (PMW) by pyrolysis process. Disposable plastic is one of the chief items in the medical waste. High density polyethylene and Polypropylene is the main component of several PMW. These plastics have a higher latent as hydrocarbons sources for chemical industry. Pyrolysis of PMW was accomplished at a temperature range of 200–300 °C in a batch reactor make up of stainless steel. The chemical and physical properties of the pyrolysis liquid were much closer to the commercial fuel like diesel, petrol etc. The density is 840 kg/m3, the gross calorific value is 4.13·104 kJ/kg flash point is 39 °C in produces pyrolytic oil. This liquid can be used as alternative sources of fuel.
Authors and Affiliations
U. Som, F. Rahman, S. Hossain
Keywords
Related Articles
- EP ID EP416409
- DOI 10.21272/jes.2018.5(2).h2
- Views 75
- Downloads 0
Membrane Processes during the Regeneration of Galvanic Solution
The transfer through the cation exchange membrane of Cd2+ and Zn2+ cations present as impurities in chromium-containing galvanic solutions has studied. Methods for constructing current-voltage characteristics, scanning e...
Learning control system of lifting machine motors
Process automation control by diagnostic electric motors in operation conditions allows to reduce to a minimum the damage from these consequences due to early detection of defects. The theory of diagnosticof lifting mach...
UWB Microstrip Line Feeding Planar Modified Circular Antenna
In this paper we have investigated compact printed semicircular disc monopole antenna, which is basically printed microstrip antenna with etched ground plane for UWB applications. In particular we have simulated very com...
Dynamic Simulation of Heat Transfer through External Building Constructions
In the paper, some approaches to dynamic modeling of heat transfer through external building constructions are presented. The model of heat transfer dynamics through a wall was designed on the base of mathematical descri...
Mathematical Modeling of the Mechanical Characteristic of the Activated PTFE-Matrix Using the Method of Planning the Experiment
In this paper, the influence of the parameters of the technological process of mechanical activation on the physical characteristics of the polytetrafluoroethylene (PTFE) matrix is investigated. The paper presents a math...