Reduced Order Extended Kalman Filter based Parameter Estimation for Induction Motor Drives
Journal Title: Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji - Year 2019, Vol 7, Issue 3
Abstract
In this study, a speed-sensored reduced-order extended Kalman filter (RO-EKF) based estimator is designed for direct vector control system of induction motors. The rotor resistance, stator resistance, and magnetizing inductance are simultaneously estimated by the designed estimator. The proposed estimator is tested by simulations for a wide speed range including very low/zero-speed and field-weakening zone, under the variations in rotor angular velocity, load torque, rotor resistance, stator resistance, and mutual inductance changes. Simulation results obtained from the proposed estimation algorithm and the speed-sensored direct vector control based induction motor drive utilizing the designed estimation algorithm are quite satisfactory. Also, the proposed estimation algorithm is known as the first RO-EKF algorithm in the literature which estimates the stator resistance, rotor resistance, and magnetizing inductance simultaneously.
Authors and Affiliations
Rıdvan DEMİR, Murat BARUT
Keywords
Related Articles
- EP ID EP674512
- DOI 10.29109/gujsc.545284
- Views 113
- Downloads 0
Selection of Suitable Microorganism for Biocatalytic Oxidation Reaction of Racemic Propranolol
Propranolol is one of the β-blockers which are pharmaceutically important, especially used for treatment of cardiovasculer disease. In this study, the production of enantiomerically pure propranolol was aimed via biocata...
An optimization model for wind turbine micro-siting in Wind Power Plant installation
The wind turbine micro-siting is one of the most important agenda topics in Wind Power Plant (WPP) installations. An appropriate siting of wind turbines increases the amount of energy produced by the WPP. In this study,...
The Comparision of Heating and Cooling Performance of a Serial and Parallel Connected Counter Flow Ranque–Hilsch Vortex Tube
In this study, two counter flow Ranque-Hilsch Vortex Tubes with body length 100 mm and inlet diameter 7 mm were used having no moving parts except a control valve for adjustment of volume flow rates. Six-orifice nozzles...
Development of an M2M Platform with a Responsive Design
Nowadays it has been clearly observed that machines are more and more communicating with each other. An M2M (Machine to Machine) communication application developed for any sector needs an M2M platfrom in order to intera...
Investigation of infrared GaAs photodetector instability
The IR photodetector instabilities in a single gap gas discharge IR image converter system with ionization type have been explored experimentally under the Townsend and glow discharge modes. In such systems under gas dis...