Regulation of the phase-structural composition and metastability of austenite by alloying elements and parameters of tempering for increase wear-resistance of Fe-Cr-Mn deposited steel
Journal Title: Український журнал із машинобудування і матеріалознавства - Year 2018, Vol 4, Issue 1
Abstract
It is shown that under the influence of alloying (Cr, Mn, C, Si, Ti, N, V) during electric arc hardfacing with a flux cored wire, as well as technological tempering parameters at temperatures of 300...700°C, the phase-structural composition of the cost-saving alloyed deposited steel (from 0 to 75 % quenching martensite and austenite), the degree of metastability of austenite are regulated. At optimal parameters of alloying and tempering, an increased wear resistance is achieved due to the development of the deformation induced martensite γ→α' transformation of austenite during the wear process, which causes the effect of self-strengthening during testing and operation. This is an important advantage of the developed metastable deposited steel before the deformation-stable metal.
Authors and Affiliations
Yan Cheylyakh
Keywords
Related Articles
- EP ID EP497944
- DOI 10.23939/ujmems2018.01.003
- Views 109
- Downloads 0
Modification of Surfaces of Special Alloys by Nitrogen for Power Engineering
The use of nitrogen as an alloying element presents a great interest for the improvement of properties of alloyed steels and special alloys. Superficial layers were formed by ionic implantation and by melting the surface...
Dynamic Properties Predictions for Laminated Plates by High Order Theories
The main aim of this study is to predict the elastic and damping properties of composite laminated plates. Some approximate methods for the stress state predictions for laminated plates are presented. For simple uniform...
Regulation of the phase-structural composition and metastability of austenite by alloying elements and parameters of tempering for increase wear-resistance of Fe-Cr-Mn deposited steel
It is shown that under the influence of alloying (Cr, Mn, C, Si, Ti, N, V) during electric arc hardfacing with a flux cored wire, as well as technological tempering parameters at temperatures of 300...700°C, the phase-st...
Computation of Shaping Errors for Fine Boring of Smooth and Stepped Holes
On the basis of precision theory we propose the method of computation of static and dynamic errors of cross-sectional shapes of holes in fine boring of smooth and stepped holes. We consider particular cross-sectional sha...
Evaluation of Dynamic Characteristics of DPKr-2 Diesel Train on Straight Sections of Railway Track
The increase in motion speed of the trains moving along certain routs changes the operational conditions and interaction of the rolling stock and the track, and requires the solution of important issues related to the sp...