RELIABILITY IMPROVEMENT OF COOLING WATER PUMP
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2018, Vol 8, Issue 3
Abstract
The project presents an idea of analyzing the stress concentration occurring on the shaft. In the centrifugal pump, there are frequent failures of the shaft during operation, due to which it leads to a breakdown or stoppage of pump working and regular maintenance is conceived. In this project, to recognize the shaft failure, we calculate the load acting on the shaft and forces exerted by the impeller. The stress analysis of the shaft is done by ANSYS software and finally gives suggestions to improve the life of the shaft.
Authors and Affiliations
Keywords
Related Articles
- EP ID EP377225
- DOI -
- Views 71
- Downloads 0
Review on Extended Surfaces used in Concentric Tube Heat Exchanger
Improving heat transfer in double heat exchanger has led to large number of studies. Double heat exchanger is commonly used in industries due to its simplicity; flexibility had a wide range of applications. One of the me...
Improving Oxidation Behavior of (Alpha- Beta) (Cu-Zn40) Brass by Aluminum Addition
Brass alloys with a zinc content of 35 % and more have a mixture of the alpha (FCC) and beta (BCC) phases, that causes an increasing in hardness significantly. Further, this alloy can be formed only by hot-working. There...
Generating Disassembly Sequences of Mechanical Assembly from Step-Cad Model
Lot of research works have been made on identifying feasible disassembly sequences for an assembly. However, those research works were concentrated on an assembly in which the parts must have single step to disassemble....
An Investigation on Mechanical Properties and Microstructure of Mg/Al Alloys using Zn Interlayer during Diffusion Bonding
The general prerequisites of a part in the mechanical, automobile and aviation have given many testing conditions. New materials can be found and manufactured to some valuable segments. This work is directed to get a bet...
THE COMPUTATION OF STIFFNESS DERIVATIVE FOR AN OGIVE IN THE HYPERSONIC FLOW
Expression for Stiffness derivative for an Ogive is derived with the suppositions of the arc on the nose of the cone from the air is being considered as perfect gas and the viscosity being neglected, the motion is quasi-...