Removal of Dye and COD from Textile Wastewater Using AOP (UV/O3, UV/H2O2, O3/H2O2 and UV/H2O2/O3)
Journal Title: Journal of Environmental Health and Sustainable Development - Year 2018, Vol 3, Issue 4
Abstract
Introduction: Textile industry effluent is a complex sewage with chemical and color materials that is discharged into the environment and can cause serious problems. In this way using advanced oxidation methods and finding the best methods for removing color materials is necessary. An experimental method was done on Kashan textile industry effluent in laboratory scale and batch system. Material and Methods: Initially, optimal condition was obtained for O3 and H2O2 and followed by advanced oxidation methods (UV/O3, UV/H2O2, O3/H2O2 and UV/H2O2/O3) in different reaction times and pH on dye removal and COD (chemical oxygen demand) were determined. The results were compared with complex repetition method. Results: The results of this research showed that dye removal impact and COD based on the type of process and reaction time in UV/H2O2/O3 by 30 minute time duration, was the most effective method. UV/H2O2 in 10 minute time duration was the least effective method. COD and color removal, based on the process in UV/H2O2/O3 and pH = 6 was the most effective. The effect of UV/H2O2 and pH = 4 was the least efficient method on dye material removing. Results showed that the treatment time was effective on color removing (P < 0/001) statistically. Conclusion: It can be concluded that UV/H2O2/O3 was the most efficient on color removing process, compared to the others, due to co-incidence presence of strongly numerous oxidants and their aggravating effect through producing active hydroxyl radicals (OH˚).
Authors and Affiliations
Mehrangiz Pourgholi, Reza Masoomi Jahandizi, Mohammadbagher Miranzadeh, Ommolbanin Hassan Beigi, Samaneh Dehghan
Investigating the Health and Economic Evaluation of Health-Care Wastes Disinfection Equipment of Tehran Hospitals in 2016
Introduction: Health-care waste can threaten the health of humans and environment due to dangerous, toxic and pathogenic agents. This study was conducted to investigate the status of disinfection equipment in Tehran hosp...
Nourishment Essential Requirement for Bio-Hydrogen Production in Anaerobic Condition
Whereas quantity of fossil fuels is limited, Large-scale production of hydrogen is a necessity for the world. It is concluded that hydrogen is the most promising option in the succession of fuel evolution. Combustion of...
Evaluation of Heavy Metals in Drinking Water Resources in Urban and Rural Areas of Hamadan Province in 2016
Introduction: Drinking water should be free of any chemical contaminants. One of the important aspects of drinking water pollution is presence of heavy metals that can be hazardous for consumer’s health. This study was c...
Performance Evaluation of Point-Of-Use Drinking Water Treatment Units in Removal of Heavy Metals and Dissolved Solids from Drinking Water Supply in Tabriz
Introduction: Application of point-of-use (POU) drinking water treatment units is expanding across the world due to the increased concerns about the adverse health effects of water pollution. The main treatment systems o...
Spatial Distribution, Health Risk Assessment and Survey of Fluoride Pollution Source with GIS in Drinking Water: A Case Study, Abarkouh, Iran
Introduction: Exposure to high concentrations of fluoride in drinking water can negatively affect lung, liver and kidney tissues, and cause skeleton pain; however, lack of fluoride can cause tooth decay and bone problems...