Removal of Iron and Sulphates from Acid Mine Drainage and Neutralisation of pH Using Chemical Process
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 30, Vol 2, Issue 9
Abstract
Acid mine drainage refers to the outflow of acidic water from a mining site. A significant number of coal mines suffer from acid mine drainage. It is a worldwide problem, leading to ecological destruction in watersheds and the contamination of human water sources. The increased acidity caused by acid mine drainage has a range of negative effects depending on the severity of the pH change. AMD ia normally having high amounts of sulphur and iron also. Limestone, dolomite and slag have been tried for the removal of iron and sulphates from acid mine drainage water. It has been found that these chemicals can be successfully used for the removal of iron and sulphates and to neutralise the pH of acid mine drainage water.
Authors and Affiliations
Swetti Jha
A SURVEY ON IMAGE MINING TECHNIQUES FOR BRAIN TUMOR CLASSIFICATION
Brain tumor is the major problem for increase the growth of the development countries. Improve the detection of disease in the medical field image mining techniques is widely use. Detection is necessary for discov...
WATER QUALITY IMPACT ON THE DAM CONCRETE FOR UPCOMING PUMPED STORAGE SCHEME IN WEST BENGAL
The construction of large capacity dams on major rivers in the country is required to full fill country’s irrigation and power requirements. The long term sustainability of these structures is largely dependent on...
A Survey on Automatic Vehicle Parking and Retrieval Using Android Smartphone
This paper focuses the construction of the system which assists in parking and retrieving of the car automatically. Unlike previous generation this system drives automatically while parking which is controlled wit...
Microcontroller Based Advanced Triggering Circuit for Converters/Inverters
This paper presents an advanced method of generating triggering pulse using Microcontroller (8051) whose delay angle is controlled by the feedback signal given by Analog to Digital Converter (ADC) to Microcontroll...
NUMERICAL INVESTIGATION OF CAPILLARY TUBE BY REPLACING THE INSIDE REFRIGERANT AND DIAMETER
The capillary tube used in the mostly in the refrigerant flow control devices. Hence performance of the capillary tube is best for good refrigerant flow. The many researchers had been concluding performance using experim...