Removal of priority PAHs from coking wastewater
Journal Title: Civil and Environmental Engineering Reports - Year 2013, Vol 1, Issue 10
Abstract
The purpose of these tests described in this study was to determine the effectiveness of removing eight aromatic compounds from the list of priority. Tests were carried out using coke produced during wastewater treatment of coke oven gas. The technology research was consisted in introducing into wastewater samples taken with 30% solution of hydrogen dioxide (50 mg/dm3, 100 mg/dm3, 300 mg/dm3, 600 mg/dm3, 900 mg/dm3, 1000 mg/dm3, 2000 mg/dm3). The PAHs analysis included: sample preparation, quantitative and qualitative chromatographic determination, it was also carried out using gas chromatography coupled with mass spectrometer. Total concentration of PAHs in the effluent eight coke before oxidation was 23 μg/dm3. The largest loss of hydrocarbons examined, reaching 62%, was noted at the dose of 50 mg/dm3 of the oxidant.<br/><br/>
Authors and Affiliations
A. Turek, M. Włodarczyk-Makuła
Keywords
Related Articles
- EP ID EP346905
- DOI -
- Views 67
- Downloads 0
Weight minimization of structural components reinforced with fiber-mat
Free vibrations of thin plates with transversally graded structure
Shaping the water conditions in the postmining areas (a case-study of Brown Coal Mine „Adamów”)
The article presents the issues of shaping the water conditions in the mining areas given the example of Brown Coal Mine "Adamów". At the stage of the exploitation of deposit by opencast mining, the water conditions in t...
TRIMBLE M3 1” AND SOUTH NTS-362R TOTAL STATION ANGLE MEASUREMENT ACCURACY ANALYSIS
The main purpose of this study was to obtain information about the actual precision of angle measurements with two instruments (Trimble M3 1 "and South NTS-362R), realizable in given measurement conditions. This object i...
APPLICATION OF THE MATHAR METHOD TO IDENTIFY INTERNAL STRESS VARIATION IN STEEL AS A WELDING PROCESS RESULT
The paper deals with the method to identify internal stresses in two-dimensional steel members. Steel members were investigated in the delivery stage and after assembly, by means of electric-arc welding. In order to perf...