Reparatory and Manufacturing Hard-Facing of Working Parts Made of Stainless Steels in Confectionary Industry
Journal Title: Tribology in Industry - Year 2012, Vol 34, Issue 3
Abstract
In this paper, for the sake of improving the reparatory hard-facing technology is especially analyzed reparatory hard-facing of tools for manufacturing compressed products in confectionary industry. Those products are being made of a mixture consisting of several powdery components, which is compressed under high pressure. In that way the connection between particles is realized, thus achieving certain hardness and strength of the confectionary product. The considered tool is made of high-alloyed stainless steel. The tool contains 30 identical working places. Besides the production process wear, on those tools, from time to time, appear mechanical damage on some of the products' shape punches, as cracks at the edges, where the products' final shapes are formed. Those damages are small, size wise, but they cause strong effect on the products' final shape. The aggravating circumstance is that the shape punch is extremely loaded in pressure, thus after the reparatory hard-facing, the additional heat treatment is necessary. Mechanical properties in the heat affected zone (HAZ) are being leveled by annealing and what also partially reduces the residual internal stresses.
Authors and Affiliations
S. Rakić, V. Lazić, R. Nikolić, D. Milosavljević
Slew Bearings Damage Detection using Hilbert Huang Transformation and Acoustic Methods
Slow speed slew bearings are widely used in many applications such us radar, aviation and aerospace units, bogie bearings for vehicles, harbor and shipyard cranes. Slew bearings are design to carry out high axial and rad...
The Potential of Magnesium Alloys as Bioabsorbable/ Biodegradable Implants for Biomedical Applications
The potential of magnesium alloys as bioabsorbable / biodegradable implants for biomedical applications has been extensively studied as emerging direction. This paper gives a review of current topics in this field. Resea...
Tribological Coatings for Aerospace Applications and the Case of Wc-Co Plasma Spray Coatings
Friction and wear requirements in aerospace systems are dictated by life limiting problems. One challenge is the broad range of contact stresses and sliding speeds for various movable devices. Another challenge is the ex...
Prediction of Coated Tools Performance in Milling Based on the Film Fatigue at Different Strain Rates
The knowledge of coated tool wear mechanisms in milling is pivotal for explaining the film failure and selecting the appropriate cutting strategy and conditions. In this paper, tool wear experiments were carried out in m...
Analyzing the Surface Roughness Effects on Piston Skirt EHL in Initial Engine Start-Up Using Different Viscosity Grade Oils
The absence of fully developed fluid film lubrication between Piston and Liner surfaces is responsible for high friction and wear at initial engine start‐up. In this paper flow factor method is used in two dimensional Re...