Research and Analysis of Rapidly Changing Gas Flow Temperatures Measurement Methods
Journal Title: Energy Engineering and Control Systems - Year 2017, Vol 3, Issue 1
Abstract
The temperature of a transducer sensitive element, as a result of its heat capacity, will always lag behind the temperature of the gas flow if this temperature changes. When measuring the flow temperature that varies in time, the transducer doesn't follow the changes in temperature immediately because its sensitive element temperature changes after some time. The distortions of the transducer readings are caused by the thermal inertia due to non-stationary heat processes in the transducers, as well as between transducer and the environment. Since complete elimination of real temperature transducer inertia is not possible, the transducers with some finite values of the thermal inertia are used at practice to measure the varying gas flow temperature. The necessary information about the flow temperature can be obtained by analyzing the record of the non-stationary measurement process. In this case a direct calculation of the flow temperature is made or a correction of the temperature transducer readings delay is made. The results of research and analysis of measurement methods of rapidly changing gas flow temperatures by the direct calculation of the flow temperature and by correcting the temperature transducer readings are presented in this paper.
Authors and Affiliations
Vasyl Fedynets, Leonid Lesovoi, Bohdan Chaban
Keywords
Related Articles
- EP ID EP256980
- DOI 10.23939/jeecs2017.01.029
- Views 71
- Downloads 0
The Estimation of Exergy Efficiency and Exergy Losses in Air Conditioning Systems of Operating Cleanrooms by a Grassmann Diagram
An important place in the up-to-date technologies related to energy transformation is occupied by the processes and equipment for which the objective value of energy perfection can be defined only on the basis of the the...
Improvement of 6/10 kV Distribution Power Networks Efficiency
The study focuses on the ways to improve the operation efficiency of 6 kV and 10 kV distribution power networks on the example of the Horodok District Power Network, Lvivoblenergo PJSC (Ukraine). The main drawbacks of th...
Simplified Method for Calculation of the Joule–Thomson Coefficient at Natural Gas Flowrate Measurement
This work deals with measurement of natural gas flowrate and volume by means of pressure differential devices. The existing methods for calculation of Joule-Thomson coefficient to be applied in pressure differential flow...
Research and Analysis of Rapidly Changing Gas Flow Temperatures Measurement Methods
The temperature of a transducer sensitive element, as a result of its heat capacity, will always lag behind the temperature of the gas flow if this temperature changes. When measuring the flow temperature that varies in...
Computer-Aided System for Monitoring and Planning of Actions to Increase Machine-Building Enterprises Energy Efficiency
The article describes mathematical model of analyses the energy use costs efficiency (depending on the type and volume of products produced by the machine-building enterprise, the consumption of certain types of energy r...