Research in Industrial Trials to Improve Trough-Thickness Z35 Properties of Hot Rolled Heavy Plates up to 60 mm Thickness for Structural Steels
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2016, Vol 39, Issue 2
Abstract
The main purpose of this industrial experimental rolling, done in ArcelorMittal Galati in the Heavy Plate Mill is to check the correlation between mechanical properties and the microstructure of chemical compositions used in trial in order to reach through-thickness Z properties. First chemical composition is C_Mn steel with mechanical properties designed to reach at least 275 MPa on yield strength. The other chemical composition is based on Nb and Ti alloying elements with mechanical properties designed to be equal or higher than 360 MPa. In total, four slabs with 250 mm thickness were rolled. Two slabs with targeted plates thickness of 22.5 mm and 60 mm were used in trial per each chemical composition in order to check the thickness feasibility of targeted through-thickness Z properties.
Authors and Affiliations
Costel DURDUC, Liviu GURĂU, Elena DRUGESCU, Viorica MUȘAT
XRD Analysis in Front of a Corrosion Crack Tip
During exploitation of the heat exchangers some damages can appear in the contact region between the gaskets and the stainless steel walls. The studies upon the material were performed using SEM microscopy, X-ray diffrac...
Influence of the Furnace Temperature in Continuous Flux Quenching on the Characteristics of Low Carbon Steel Straps
In this paper there are presented mechanical characteristics (resiliency, elongation) and structural characteristics resulted from quenching thermal treatment made on an experimental installation, in continuous flux, on...
Elastoplastic Model for the Steel Bars under Thermal Treatments
In order to understand material behavior, during the stresses action produced by thermal effects of volume, was started from Hooke relations, whereat was added the expressions that take into account these effects. Have b...
Improving Slab Quality Through Control of Cooling Parameters in Continuous Casting Plants
Coupling the continuous casting installations with the rolling ones is a modern process that brings considerable economic benefits. During the continuous casting process of steel slabs, necessary technological conditions...
Ibuprofen: Original Versus Green Synthesis
This paper makes a parallel between the original route versus the green route of Ibuprofen (non-steroidal anti-inflammatory drugs most commonly recommended) synthesis. The original route contained six steps with stoichio...