Research of speed and accuracy of speech synthesis methods for the purposes of deployment in embedded device
Journal Title: Bulletin of the Military University of Technology - Year 2018, Vol 67, Issue 2
Abstract
In the article, the methods concerning speech synthesis were analysed, having in mind their usage in an embedded device. Research was carried out on the devices with mixed parameters, and the criteria were accuracy and speed of the given method. The research is a part of the Toucan Eye project – an embedded device with an artificial intelligence system able to help people with impaired sight. It was shown how important is optimization of the applied methods in the phase of an engineer project to ensure better quality of a working device and the end-user’s comfort. Keywords: speech synthesis, assisting persons with impaired sight, Toucan Eye<br/><br/>
Authors and Affiliations
Artur Zacniewski, Radosław Zdunek
Keywords
Related Articles
- EP ID EP346556
- DOI 10.5604/01.3001.0012.0958
- Views 71
- Downloads 0
Kompozyty ciekłokrystaliczne do punktowych pomiarów temperatury
Zastosowanie cholesterycznych ciekłych kryształów i kompozytów je zawierających do wizualizacji pól cieplnych i pomiaru temperatury jest dobrze znane. Niezależnie od niedogodności, jakimi są ograniczona precyzja i adhezj...
Attenuation of earmuffs used simultaneously with safety spectacles in exposure to impulse noise
Impulse noise is particularly hazardous to the hearing of exposed individuals. In many real-life scenarios, the only protective measure used to reduce the level of impulse noise is hearing protectors. These scenarios inc...
Sztuczna inteligencja w wytwarzaniu oprogramowania — stan aktualny i wyzwania na przyszłość
Od czasu pojawienia się pierwszych metod i narzędzi CASE niewiele zrobiono w zakresie automatycznego wytwarzania oprogramowania. Narzędzia CASE wspierają deweloperów w tworzeniu struktury systemu, definiowaniu interfejsó...
Analysis of residual stress in 1.4539 austenitic steel joints welded with TIG method
The article compares the results of tests of residual stress determined based on Knoop microhardness measurements and obtained experimentally with the use of an x-ray diffractometer. Distribution of residual stress in th...
Diagnosing of a complex technical object in four-valued logic
This paper presents the essence of an investigation of a complex technical object with the use of four-valued logic. To this end, an intelligent diagnostic system (DIAG 2) is described. A special feature of this system w...