Research on the Manufacturing Process of Steel Bridge Piers for Suspended Monorail Transit
Journal Title: Urban Mass Transit - Year 2025, Vol 28, Issue 1
Abstract
［Objective］ Manufacturing accuracy of the steel bridge pier, which is an important part of the suspended monorail transit system, determines the erection and installation of track beams, thereby affecting the train smooth running. Therefore, it is necessary to conduct research on it. ［Method］ Based on the Tourism Special Line Phase I Project, a supporting facility for Wuhan Optics Valley Ecological Corridor Tourism, the process research is conducted in response to the T-shaped structural characteristics of steel bridge piers for suspended monorail transit and combining the design requirements for the manufacturing accuracy of steel bridge piers. The difficulties in the manufacturing process of monorail steel bridge piers are analyzed, and the manufacturing schemes for the steel cap beams are compared and selected. Moreover, the manufacturing process and accuracy control methods of suspended monorail steel bridge piers are systematically expounded. ［Result & Conclusion］ Through the actual manufacturing of steel bridge piers and the on-site erection and installation of track beams, the distance between the lug plates of the steel cap beams (0-2 mm) and the distance from the cantilever center to the column central line (-2-2 mm) can be effectively controlled. After the overall assembly and formation of the steel bridge piers, the distance error between the line connecting the positioning point of the left cap beam pin axis to the center point at the steel column bottom, and the line connecting the positioning point of the right cap beam pin axis to the center point at the steel column bottom is ≤3 mm, and the elevation error between the center of the lug plate and the center of the column is ≤2 mm, meeting the requirements for the overall assembly and production of steel bridge piers, and realizing the control over the manufacturing accuracy of steel bridge piers.
Authors and Affiliations
Guifang YIN, Wenqiang GONG, Xiaoshan CHEN, Haiyong KONG, Chao WEI, Gang ZHU
Keywords
Related Articles
- EP ID EP755022
- DOI 10.16037/j.1007-869x.2025.01.045
- Views 1
- Downloads 0
Characteristics and Applicability Analysis of Flexible Scheduling for Urban Rail Transit Crews
[Objective] In view of the situation that the flexible crew scheduling method commonly used in foreign metro systems is barely applied in China, the applicability of flexible scheduling in Chinese metro system and the ma...
Research on Real-time Wheel-rail Force Identification Network of Rail Transit under Compound Line Conditions
Objective Wheel-rail force plays an important role in the study of train running state, wheel off roundness and rail corrugation in rail transit. Current wheel-rail force identification methods have some problems, such a...
Multi-faceted Maintenance Strategy for Electronic Devices in Shanghai Rail Transit Communication and Signaling System
Objective As the failure rate of electronic devices in Shanghai rail transit system keeps on increasing, traditional maintenance approaches—characterized by slow speed of self-repair, high costs of factory repair, long r...
Selection and Heat Dissipation Analysis of Regenerative Braking Energy Absorption Device in Urban Rail Transit Depot
[Objective] The regenerative braking energy absorption resistance in urban rail transit depot has a large heat dissipation. In order to effectively solve the problem, it is necessary to select the right type of regenerat...
Fault Diagnosis and Prediction Method for Platform Door Self-holding Electromagnetic Lock System Based on Standard Deviation of Electromagnetic Circuit Current Value
Objective Platform door EL (electromagnetic lock) is one of the key components of platform doors in urban rail transit station. EL malfunctioning shall directly affect line operation safety and the normal passage of pass...