Research on the tribological parameters for materials couples used for valves, valve guides and seat inserts
Journal Title: Tribologia - Year 2010, Vol 233, Issue 5
Abstract
Research on the tribological properties of TiAl alloys used for valves mating with valve guides and seat inserts, made of cast iron, has been done. The aim of the research has been to obtain values of the coefficient of friction for such tribological pairs and to simulate the dynamics of the material sample – rotating plate assembly, characteristic used in the research stand. The modified research stand is presented in the article. During research the values of the coefficient of friction, the temperature of sample, the level of sound and the acceleration of material sample were measured. The model of the research stand was for the simulation of the dynamics for the material sample – rotating plate assembly. The plots of the coefficient of friction vs. loading, slide velocity, and the duration of the motion of material sample in respect to the rotating plate are presented in the article. Using simulation results, the values of the damping coefficient were estimated, which allow one to obtain the value for the amplitude of the modelled motion for the material sample in respect to the rotating plate near to the value of the amplitude for the real motion. This estimation allows one to forecast the dynamics of the mentioned assembly for other values of velocity and loading.<br/><br/>
Authors and Affiliations
Krzysztof Siczek, Maciej Kuchar
Keywords
Related Articles
- EP ID EP272924
- DOI -
- Views 52
- Downloads 0
NUMERICAL ANALYSIS OF THE INFLUENCE OF THE FRICTION COEFFICIENT ON STRESS DURING THE EXTRUSION PROCESS OF PERFORATED MATERIAL
Numerical analysis of stress, forces, and temperature during axisymmetrical cold extrusion of an aluminium alloy specimen was presented using Deform 3D. The rigid-plastic model was applied. The influence of a friction co...
RELATION BETWEEN SHEAR STRESS AND SHEARING TIME IN SELECTED LUBRICANT COMPOSITIONS
The paper presents the results of studies of the influence of fillers introduced into lubricating greases on changes in values of shear stresses in resulting lubricant compositions. These fillers were powders of graphite...
Mechanizm zużywania w skojarzeniu żeliwo szare-kompozyt zbrojony cząstkami AL2O3
THE INFLUENCE OF ISOTHERMAL OXIDATION PARAMETERS ON THE TRIBOLOGICAL PROPERTIES OF TITANIUM
The paper presents the results of tests concerning the tribological properties of titanium Grade 2 subjected to thermal oxidation at a temperature of 600°C and 700°C for 72 hours. Morphology of the obtained oxide scale w...
MODELLING OF THE RELIABILITY OF TOOL- -WORKPIECE SYSTEM IN MULTI-STAGE DRAWING PROCESS
The waste of tools in drawing process is characterised by surface phenomenon occuring in their upper layer. During co-operation of elementary contact area, the deformation process of drawn material takes the significant...