Resonance radial oscillations of a piezoceramic cylinders and spheres taking into account electromechanical losses
Journal Title: Вісник Тернопільського національного технічного університету - Year 2016, Vol 81, Issue 1
Abstract
Hollow piezoceramic radially polarized cylinders and spheres widely used as sound transducers and receivers are considered. The most characteristic run mode of piezoceramic transmitters is resonant mode. In this paper, a universal approach to solving of problems of forced thickness oscillations of piezoceramic cylinders and spheres is expanded on research of amplitude of the electromechanical state with due regard to mechanical, dielectric, piezoelectric energy losses. General equation system of steady oscillation of cylinders and spheres is reduced to Hamiltonian equation system which is solved by superposition of solutions of initial problems. The suggested approach enables to research into oscillation of the transmitters under electrical and mechanical load and arbitrary boundary conditions. For calculation of electromechanical state of transmitters at resonance modes the energy dissipation counts towards by the introduction of complex physical constants with predetermined values of tangents of losses. The oscillations of spheres and cylinders with electrode free outer surfaces under loading by electric potential difference are studied. The amplitude of movement of the outer surface depending on the loading frequency and geometrical dimension of the figures is considered. The amplitude of movement in the neighbourhood of the first resonance at different values of tangents of losses is studied; oscillations forms on the first three resonances are built.
Authors and Affiliations
Ludmila Grigoryeva, Sergiy Grigoryev, Oleksandr Bezverhyi
Keywords
Related Articles
- EP ID EP249319
- DOI -
- Views 88
- Downloads 0
Influence of the cutting direction of Charpy specimens from steel 10GN2MFA on the components of the fracture energy and the ductile-to-brittle transition temperature
The Charpy specimens impact tests are one of more simple and inexpensive methods to determine the mechanical properties of materials. The results of these tests can be used to estimate the strength and durability of larg...
Assessment of destruction conditions of the long-term operation gas pipeline
For the long-term operation of main oil and gas pipeline steels the method of estimation the critical crack growth resistance of pipeline steels using experimentally obtained diagram of „force-deflection“ specimens destr...
Investigation of influence of the metal corrugated pipe diameter on its stress-strain state
Metal corrugated structures require both high design quality and quality of construction. Significant contribution to the damage initiation and the MCS fracture can be caused by the imperfect methods of calculating MCS i...
Electrochemical method of control OF in-service degradation OF the marine portal cranes steels mechanical properties
At the assessment of the technical state of marine port structures it is important not only to detect in-service damages, but also to evaluate current physico-mechanical properties of the long-term operated steels. The p...
Contact problem on the wear of the elastic half-plane by canonical form stamps
The problems of contact interaction of the canonical form stamps (cylindrical, elliptical, hyperbolic) with the elastic half-plane taking into account the wastage of material, are solved. The integral equation, based on...