RESONANT SOURCE FOR THE SUPPLY OF ELECTRIC FIELD PROBE CALIBRATION SYSTEM AT FREQUENCIES BETWEEN 50Hz AND 50KHz
Journal Title: ANALELE UNIVERSITATII DIN CRAIOVA - Seria Inginerie electrica - Year 2010, Vol 34, Issue 34
Abstract
Electromagnetic environmental conditions checking and provision regarding long and short time human personal and occupational exposure is regulated by international standards. Generally, the human being is exposed mainly to the field generated by the 50 Hz low, medium and high voltage equipments or transmission lines of the electric power system but in industrial applications also higher frequencies are used in certain technological processes. This low and medium frequency electric fields have values in the range 0.5V/m − 100kV/m for frequencies within 5Hz and 400kHz. Modern electric field measuring devices works on one or three axes, with software for measured data acquisition & storage and sometimes with the possibility of GPS source localization. In Romania, there are no installations for the periodical calibration of the instruments for low and medium frequency electric field measurement. The calibration in accredited foreign laboratories is expensive and the said instruments are used almost exclusively based on the certificates issued by supplier at purchasing. The paper presents an innovative calibration solution based on a double resonant source which enables field strengths up to 100 kV/m to be achieved in a wide frequency range within 50Hz and 50kHz.
Authors and Affiliations
Andrei MARINESCU
Keywords
Related Articles
- EP ID EP118943
- DOI -
- Views 102
- Downloads 0
DEVELOPMENT, MANUFACTURE AND TESTING OF HORIZONTAL AXIS WIND MICROTURBINES WITH POWER OF 10 KW
Under the circumstances of the total energetic recourses deficit in the Republic of Moldova appears the problem of non-traditional sources utilization recovered by energy. Important sources of renewable energy are the wi...
The Rotary Magnetostrictive Motor: a Promising Solution for Low Power Actuators
This paper contains a theoretical and experimen-tal study on rotary magnetostrictive motor, performed with the purpose of determining the optimal conditions of opera-tion. The two main types of magnetostrictive motors kn...
Disturbance Analysis for Power Systems Based on LabVIEW Real-Time and Reconfigurable FPGA Modules Using Wavelet Transform
This paper present a disturbance analysis monitoring system for the purpose of detection of disturbance analysis using Wavelet Transform (WT). The proposed system is based on the real-time capabilities of the Real-Time L...
Modern AC Drive System with Induction Machine
The induction machine is widespread in AC drive system. The energy efficiency of the induction machine during dynamic regimes is up to 40%. Therefore, for the electrical drives with frequent dynamics (starting, breaki...
Neuro-fuzzy DTC for an Electrical Drive System with Induction Motor. A SISO controller for the velocity loop
The paper presents some design aspects concerning the implementation of a neuro-fuzzy controller for the velocity loop of an electrical drive system with induction motor and a Direct Torque Control strategy. The approach...