Results of studies of kinematic and power parameters of transmission for mine diesel locomotive with differential at output

Abstract

The work is devoted to the problem of a complex study of variations in the power, kinematic and energy parameters of a hydrostatic mechanical transmission "with a differential at output" during its operation in traction and transport ranges of diesel mine locomotive running. Values of the basic transmission parameters, namely the maximum speed of the diesel-electric locomotive, the maximum angular velocity of the shaft of a hydraulic motor and a hydraulic pump, the maximum value of the transmission efficiency, and the maximum working pressure drop in the hydrostatic transmission, are obtained by the solution of a set of the algebraic equations. A peculiarity of the static model under consideration is that the calculation is carried out using the two values of angular velocities of shafts of hydraulic machines and the current and preceding working pressure drops in the transmission, resulting in an accurate determination of all of the kinematic, power and energy parameters of the transmission. Each parameter is determined until the value of the parameter under consideration at the preceding iteration becomes equal to the current value. The results obtained will be used in the determination of the reference data to simulate breaking the diesel mine locomotive

Authors and Affiliations

I. Taran

Keywords

Related Articles

Dynamic simulation of closed cycles of fine grinding

Taking into account high power consumption of fine grinding, it is necessary to develop optimal conditions of production of the pulverizing mill with the required output of the control class and reduced power consumption...

Determination of locomotive derailment stability conditions in emergency collisions

This paper discusses the behavior of a locomotive in its collision with a movable obstacle on the railway track. Movable obstacles of different masses were considered: a freight train, a similar locomotive, and an empty...

Numerical simulation of supersonic flow over Zenit-2SLБ launch vehicle

The results of a numerical simulation of a supersonic flow over the Zenit-2SLБ launch vehicle at angle of attack 5, 15 and 25 degrees are presented. Attention in this work is devoted to obtaining the proved three-dimensi...

Methodic approach to calculations and selection of parameters of splashing system for propellant preparation

One of the important problems is to provide the required parameters of propellant components, which are attained by the propellant preparation. This problem is resolved by facilities for spacecraft propellant filling. In...

Analysis of technologies for spacecraft removal from low earth orbits using onboard-produced electromagnetic and magnetic fields

The aim of this paper is to analyze the effectiveness of propulsion devices with permanent magnets as an alternative space debris deorbit system for low earth orbits. The paper considers current problems in the developme...

Download PDF file
  • EP ID EP324385
  • DOI -
  • Views 118
  • Downloads 0

How To Cite

I. Taran (2017). Results of studies of kinematic and power parameters of transmission for mine diesel locomotive with differential at output. Технічна механіка, Техническая механика, Technical Mechanics, 1(1), 83-90. https://europub.co.uk./articles/-A-324385