REVIEW OF THE BOOK: WALDEMAR NAWROCKI, INTRODUCTION TO<br /> QUANTUM METROLOGY (IN POLISH)
Journal Title: Metrology and Measurement Systems - Year 2008, Vol 15, Issue 3
Abstract
Quantum metrology is a field of theoretical and experimental study of high-resolution and high-precision methods of measurement of physical parameters based on quantum mechanics, and particularly exploiting quantum entanglement. Without equivalent in classical mechanics, quantum entanglement of particles or other quantum systems is an unusual phenomenon in which the state of a system is determinable better than the state of its parts. Attempts are made to use new measurement strategies and physical systems in order to attain measurement precision never achieved so far.
Authors and Affiliations
Krystyna Kostyrko
ACCURATE WEIGHING OF MOVING VEHICLES
The paper deals with real-time Multi-Sensor Weigh - In - Motion System (MS-WIM). This system was designed in Poland in a period of 3 years from 2003 to 2006. The embodied system is equipped with 16 piezoelectric load sen...
PROPOSAL OF ARCHITECTURE OF DISTRIBUTED VIBRATION MONITORING SYSTEM WITH FLEXIBLE ARCHITECTURE AND REMOTE ACCESS SUPPORT
With advances in IT technologies even complex machines with several gears and bearings, running at varying rotational speed can be effciently monitored with an algorithm consisting of a combination of signal envelope and...
THE INFLUENCE OF INACCURACY OF CALCULATING ALGORITHMS USED IN THE CMMS ON MEASUREMENT RESULTS -FINAL REPORT<br />
The author has devised a test for evaluating the accuracy of calculation algorithms and used it to establish the accuracy of the software of fourteen CMMs offered by world top manufacturers. Using a minimum number of mea...
CALIBRATION OF REFERENCE STANDARD QUARTZ ROTATING PLATES
An accurate linear polarized optical system for calibrating the quartz plate angles is introduced in this work. The quartz plate parallelism and surface roughness are measured using a phase shifting laser interferometer...
RECTIFICATION
Unfortunately, in the issue number 1/2006 Metrology and Measurement Systems in the article: Zygmunt L. Warsza “Two-parameter measurements and signal conditioning in double – current supply four – terminal resistance circ...