Review on Behaviour of Outrigger System on High Rise Structure by Varying Outrigger Depth
Journal Title: International Journal for Research in Applied Science and Engineering Technology (IJRASET) - Year 2017, Vol 5, Issue 2
Abstract
Tall building development has been rapidly increasing worldwide introducing new challenges that need to be met through engineering judgment. In modern tall buildings, lateral loads induced by wind or earthquake are often resisted by a system of coupled shear walls. But when the building increases in height, the stiffness of the structure becomes more important and introduction of outrigger beams between the shear walls and external columns is often used to provide sufficient lateral stiffness to the structure. The outrigger and is commonly used as one of the structural system to effectively control the excessive drift due to lateral load, so that, during small or medium lateral load due to either wind or earthquake load, the risk of structural and non-structural damage can be minimized. For high-rise buildings, particularly in seismic active zone or wind load dominant, this system can be chosen as an appropriate structure. The objective is to study the behavior of outrigger and, optimization of outrigger depth.
Authors and Affiliations
Viren P. Ganatra, Prof. Rashida A. Jhummarwala, Dr. Kaushal B. Parikh
Keywords
Related Articles
- EP ID EP23206
- DOI http://doi.org/10.22214/ijraset.2017.3009
- Views 257
- Downloads 7
Red Tacton Human Area Networking
Almost all the services asked by the user in the present day require technologies that enable communication between people and objects in close proximity. Let us make use of a technology which is neither wireless nor a...
Comparison of Different De-Interlacing Algorithms Using Fuzzy Logic
Video processing is a special case of signal processing. These video processing techniques are used in television sets, DVDs, video players and other devices. Digital video is a representation of moving visual images in...
Automatic Irrigation System using Embedded System and GSM Technology
The increase in human population resulted in the increase of the demand for food production. Farmers are unable to meet the requirements due to irregular water supply. To meet the demand, a new type of system is needed...
Comparison of Thermal Characteristics of Simple Boiler with Circulating Fluidized Bed (CFB) Boiler using Thermal Analysis
In this paper, a simple boiler and a CFB boiler are compared for the better thermal characteristics. In general the material used for boiler is steel. But we are replaced with copper and brass. Thermal analysis is done...
Automated Attendance System using Haarcascade : A Face Recognition Approach
Students Attendance system is smart way of marking attendance. This work describes the methodology where attendance is recorded by using camera attached inside the classroom that is capturing images of students, detect...