Review on the Effect of Uniaxial Forces on Moony Rivline Hyperelastic Material Model

Abstract

Analytical material models do not entirely describe the stress-strain relationship in a material under all loading conditions. Therefore, experimental data needs to be created such that a reasonable material model may be selected to define material behaviour pertinent to the application of interest. Loading variables such as strain rate, strain direction, maximum strain, relaxation, cyclic behaviour and plasticity are outlined to provide a context for the design of experiments needed to define hyperelastic and plastic material models based on the needs of the application. The work presents a review of some problems associated with the simulation of hyperelastic fabrics using Finite Element Analysis. The precision and accuracy of experimentally measured material properties are critical for correct fabric modelling. In general, a combination of uniaxial tension (compression), biaxial tension, and simple shear is required for the characterization of an hyperelastic material. However, the use of these deformation tests to obtain the mechanical properties of a fabric may be complicated and also expensive. A methodology for characterising the fabric employing one single experimental test is presented and the error induced by this approximation is determined. The effects of experimental limitations on the characterization of material and the pros and cons of choosing a constitutive model are discussed.

Authors and Affiliations

Prashant P Nimbalkar, Dr. Suhas P Deshmukh

Keywords

Related Articles

Optimized Flyash in Concrete for Grade M15, M20, M25, M30, M35, M40 Using Portland Slag Cement

Earlier fly ash is being used in concrete with ordinary Portland cement. Optimization of fly ash in concrete by using Portland slag cement have obviously good impact on lowering the cost of concrete as well as consumpti...

DVB-T/T2 Performance in Advanced Mobile TV Channels

The second generation terrestrial standard DVBT2 has a more flexible approach of the system parameters for the mobile and portable digital television broadcasting then DVB-T. This paper deals with the exploring of the D...

Modeling and Analysis of Three Phase Induction Motor Drive System Using Two Parallel Rectifiers for Power Factor Correction

This paper presents a single-phase to three-phase drive system composed of two parallel single-phase rectifiers, a three-phase inverter, and an induction motor. It gives the comparison between the single-phase rectifier...

A Non-Invasive Tunable Current Circuit Breaker (TCCB) for Motor Protection in Industries

In the case of industries, once a power system is established, it is essential to protect the equipment from faults. The major portion in total load is occupied by motor load and protection of motor by Motor Protection...

Cost based Selection of Cloud Providers using Broker in Multi Cloud Environment

In cloud computing resources are provided to customers based on their priorities and their requests, but sometimes non-cloud provider organizations also want to share their unused resources through cloud broker to same...

Download PDF file
  • EP ID EP21569
  • DOI -
  • Views 253
  • Downloads 3

How To Cite

Prashant P Nimbalkar, Dr. Suhas P Deshmukh (2016). Review on the Effect of Uniaxial Forces on Moony Rivline Hyperelastic Material Model. International Journal for Research in Applied Science and Engineering Technology (IJRASET), 4(1), -. https://europub.co.uk./articles/-A-21569