SELECTED ASPECTS OF THE STRUCTURAL ANALYSIS OF THE NORTH DOME IN THE "FOUR DOMES PAVILION"
Journal Title: Civil and Environmental Engineering Reports - Year 2015, Vol 2, Issue 17
Abstract
The subject of the paper is north dome of the Four Domes Pavilion in Wroclaw, which was erected according to the project by architect Hans Poelzig in 1913. The geometry of the dome (plan, rise, thickness) has an essential influence on the stress distribution in the structure and may be a crucial factor determining the cracking pattern. The results of the study of archival documents and numerical analysis indicate that there is a need for increasing the bearing capacity of the structure. After carrying out 3D FEM analysis, it was decided to apply strengthening technology based on the FRCM system with carbon and P.B.O. fibers on the surface and on the external ring of the dome.
Authors and Affiliations
Jerzy JASIEŃKO, Krzysztof RASZCZUK, Marta MOCZKO, Magdalena PIECHÓWKA-MIELNIK
Keywords
Related Articles
- EP ID EP239710
- DOI -
- Views 59
- Downloads 0
COD FRACTIONS IN MECHANICAL-BIOLOGICAL WASTEWATER TREATMENT PLANT
The paper presents results of studies concerning the designation of COD fraction in the raw, mechanically treated and biologically treated wastewater. The test object was a wastewater treatment plant with the output of o...
DYNAMIC REDUCTIONS FOR THE NONLINEAR SOIL-FOUNDATION-STRUCTURE SYSTEM INTERACTIONS
The article presents new dynamic superelements for DOF (degrees of freedom) reduction. Proposed spectral superelements (SES) are based on the method of normal coordinates. The developed superelements with basis nodes (SE...
The effect of the addition of cellulose on the quality and thermal properties of straw bedding
The objective of the study was to determine the effect of the addition of recycled cellulose on the quality and temperature of the straw bedding. Starting from week 2 of the production cycle temperatures were registered...
STRESS EQUATIONS FOR ADHESIVE IN TWODIMENSIONAL ADHESIVELY BONDED JOINTS
The subject of this paper is formulation of shear stress equations for plane twodimensional adhesive layers present in adhesively bonded joints. The adherends are assumed to have the same thickness and be made of an isot...
TECHNOLOGICAL MOISTURE AS A CAUSE OF MOULDS ON BUILDING PARTITIONS
The intense pace of construction work means that technical materials contain so-called technological moisture, which enables the development of biodeteriogenic organisms on building partitions. This article presents the...