Selective Growth of 1D Nanostructures Oxide Materials Using PDMS Stamp
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2012, Vol 35, Issue 1
Abstract
The approach for selective growth of 1D nanostructured oxide materials using poly (dimethylsiloxane) (PDMS) stamp consists of using microcontact printing, as such the soft lithography technique, for transferring the pattern of ZnO film on a substrate, followed by the hydrothermal growth of 1D nanowires on patterned areas. The nanowires have been grown in aqueous solutions of zinc nitrate at temperature at 95°C. The wettability of the glass and of the Si/SiO2 substrates was investigated by contact angle measurements. The morphology of the nanostructures obtained was characterized by optical microscopy and scanning electron micoscopy.
Authors and Affiliations
Anca-Ionela DANCIU, Viorica MUSAT, Tito BUSANI, Alexandra GONÇALVES, Joana V. PINTO, Mafalda COSTA, Iwona BERNACKA-WOJCIK, Rodrigo MARTINS, Elvira FORTUNATO
Keywords
Related Articles
- EP ID EP625579
- DOI -
- Views 65
- Downloads 0
Oxinitrocarburizing in Fluidized Bed Technology Applied to Drawing Steels
Steels oxinitrocarburizing is a thermochemical treatment in order to obtain a slight increase of mechanical properties associated with increased of corrosion resistance. The paper is based on experiments performed on a p...
Environmental Benefits of Rapeseed Methyl Ester Use as Fuel for Diesel Engines
The continuously increasing number of auto vehicles that determine a substantial growth of greenhouse gas emissions, along with the decrease of fossil fuel supply and the increase of its price, make necessary the intensi...
An Overview of Assessment of the Blast Furnace Slag Transformation into Value Added by-Products on Basis of its Characteristics Knowledge
The slags are the main by-products generated during iron and crude steel production and the steel industry is committed to increasing and improving their recycling. Today the quantity of slag produced and its utilization...
Aspects Regarding the Biocorrosion of the Paper Manufactured Machines
This paper presents the main microorganisms causing biocorrosion, the concentration, their effects and a series of measures for their reduction. The conclusion is that the sulpho-reducing bacterius are responsible for th...
Structure and Corrosive Firmness of Composition Materials on the Basis of Copper and Molybdenum Got Method Electron-Beam Technology
The article describe the study of corrosive firmness of composition materials on the basis of copper, obtained by EB-PVD method. Corrosive firmness of condensates was explored by gravimetric method. The especially decrea...