Severe Plastic Deformed Pure Aluminum by Equal Channel Angular Pressing
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2009, Vol 32, Issue 1
Abstract
Samples of an aluminum alloy were subjected to an equal channel angular pressing (ECAP) at room temperature for one pass. For the several specimens severe plastic deformation process was interrupted to observe the material flow. Also are studied the force variation in SPD process and hardness in different zones of the deformed sample.
Authors and Affiliations
Gheorghe GURAU, Carmela GURAU, Dinel TANASE
Keywords
Related Articles
- EP ID EP658775
- DOI -
- Views 74
- Downloads 0
The Properties of Hardened Lead
Lead hardened through oxide scattering is investigated as raw materials for the fabrication of the support gratings of lead accumulators in order to increase their life service. For the preparation of lead powder hardene...
Electrochemical Corrosion of Stainless Steels in Commercially Soft Drinks
In recent years, there has been a developing trend towards the use of advanced materials in the dental replacement industry. Corrosion mechanisms of 316L Stainless Steel in electrolyte containing common household soft dr...
Choosing and Using Rationally the Thermic Processed Steels
On a global scale one can notice a constant preoccupation for a rational choosing and using of the materials on the whole and, especially of the steels with the main objective the increase of the machines’, equipment’ an...
Transparent and Conducting Tin Oxide Thin Films Deposited by Spray Pyrolysis
The chemical spray pyrolysis technique has been one of the major techniques to deposit a wide variety of materials in thin film form, for different applications. The most important control parameters for obtaining good q...
Improving Functional Parameters for Pressure Casting Machine with High Degree of Finishing
The paper presents a mathematic model of static and dynamic characteristics for casting machine. This machine has a hydraulic action for the casting chamber (her closing and introducing of molten alloy). This action is m...