Silumins alloy crystallization
Journal Title: Archiwum Odlewnictwa - Year 2009, Vol 9, Issue 3
Abstract
This paper presents the results of research, by ATD method, of hypo-, near- and hyperutectic silumins crystallization containing the following alloying additives: Mg, Ni, Cu, Cr, Mo, W, V. It has been shown that, depending on their concentration may crystallize pre-eutectic or eutectic multicomponent phases containing these alloy additives. It has been revealed that any subsequent crystallizable phase nucleate and grows near the liquid/former crystallized phase interface. In multiphases compound also falls the silicon, resulting in a reduction in its quantity and the fragmentation in the eutectic mixture. As a result, it gets a high hardness of silumins in terms of 110-220HB.
Authors and Affiliations
S. Pietrowski, T. Szymczak
Keywords
Related Articles
- EP ID EP72023
- DOI -
- Views 94
- Downloads 0
An application of advanced information technology in foundry engineering
The main goal of our lately researches bas been to prove that application of technological knowledge can be supported by artificial intelligence tools and internet techniques. Computer aided systems for technological pro...
Abrasive wear resistance of high-vanadium cast iron
The study presents the results of tribological tests made on Fe-C-V and Fe-C-V-Si alloys undergoing volume solidification and containing carbon in a range of 1,43-2,58%, vanadium in a range of 5,34-14,77%, and silicon in...
The effect of recasting on corrosion of DUCINOX prosthetic alloy
The effect of recasting, up to two times, Ni-Cr (DUCINOX) prosthetic alloy on its corrosion properties was carried out. The corrosion measurements were done in deoxygenated Fusayama Meyer artificial saliva solution at te...
Influence of modification on the structure and morphology of fractures of silumin AlSi6Cu4
The results of modification of silumin AlSi6Cu4 with additions of AlTi5B1 and AlSr10 have been showed. It was found that the modification has favorable influence into structure and fracture morphology of tested alloy.
Cast in situ composites of Ni3Al / MeC type
In this work a new method SHSB (Self- Propagating High-Temperature Synthesis in Bath) has been used to produce of five new composites i.e.Ni3Al / TiC, Ni3Al / WC, Ni3Al / Zr, Ni3Al / NbC and Ni3Al /TaC (in the amount of...