Simulation of an Efficient Hybrid Transformer DC-DC Converter for PV Based Renewable Energy Sources -Power Conditioning Systems (PCS) Applications with High Boost Ratio
Journal Title: International Journal of Science Engineering and Advance Technology - Year 2014, Vol 2, Issue 9
Abstract
With the increase in renewable energy resources there is need for better conversion devices. as most of the renewable energy resources are low voltage devices like PV cells and fuel cells the voltage needs to be stepped up before conversion. So there is a need for high efficient dc-dc converter. In this paper a nonisolated, high boost ratio hybrid transformer dc-dc converter with applications for low voltage renewable energy sources is being proposed. The proposed converter utilizes a hybrid transformer to transfer the inductive and capacitive energy simultaneously, achieving a high boost ratio with a smaller size magnetic component. As a result of incorporating the resonant operation mode into the traditional high boost ratio PWM converter, the turn off loss of the switch is reduced, increasing the efficiency of the converter under all load conditions. The input current ripple is also reduced because of the linear-sinusoidal hybrid waveforms. The voltage stresses on the active switch and diodes are maintained at a low level and MPPT algorithm is being added to the proposed model utilizing the maximum power generated from the low voltage PV system.
Authors and Affiliations
RAJENDER| P.G. scholar, Dept of EEE Trr College of Engineering & Technology, Hyderabad, Telangana, India, L. MURALI KRISHNA| Assistant professor, Dept of EEE Trr College of Engineering & Technology, Hyderabad, Telangana, India
Keywords
Related Articles
- EP ID EP16309
- DOI -
- Views 359
- Downloads 18
The Effect of Aggregate Gradation on Design Mix using Modified Bitumen
Pavements undergo different type of stresses through out there life. Out of which rutting and fatigue are major distresses. To combat these problematic aspects of roads we have to deal from the root level of design m...
3D Modelling & Detailing of Silumin Piston With Static Analysis
Piston is the part of engine which converts heat and pressure energy liberated by fuel combustion into mechanical work. Engine piston is the most complex component among the automotives. Weight reduction has been gai...
Photovoltaic System with Step Up Converter
A novel step up converter which is proposed for a front end photovoltaic power system. Through a voltage multiplier module in which an asymmetrical interleaved step up converter usually high step up gain without whic...
Contact Stress Analysis of Helical Gear by Using AGMA and ANSYS
Gears are one of the most critical components in mechanical power transmission systems. The gears are generally used to transmit power and torque. The efficiency of power transmission is very high when compared to ot...
Analysis And Design Of Flat Slab By Using Etabs Software
“Flat Slab†is better understood as the slab without beams resting directly on supports (like columns & or walls).By virtue of that large Bending Moment & Shear Forces are developed close to the columns. Flat sla...