Simulation of Dynamic Processes of Gas Flow in Collector Systems
Journal Title: Energy Engineering and Control Systems - Year 2015, Vol 1, Issue 2
Abstract
By using CFD-simulation, plug length simulation of local resistance type plugged tee, which changes the flow direction, using equations of hydrodynamics was carried out. During simulation, velocity of medium in the thread of the collector system in which local input resistance was plugged tee, which changes the flow direction, was measured. Herewith for determination of this velocity and reduction of its distortion collector system simulation at different plug lengths was carried out. Plug lengths of local resistance type plugged tee, which changes the flow direction, where the distortion of flow rate diagram disappears, were determined. The equation for calculating length of the thread of the collector system to the place where distortion of gas flow rate disappears, to the plug length of local resistance type plugged tee, which changes the flow direction was obtained.
Authors and Affiliations
Leonid Lesovoy, Volodymyr Kuzyk
Keywords
Related Articles
- EP ID EP255558
- DOI 10.23939/jeecs2015.02.111
- Views 80
- Downloads 0
Energy Saving from Tap Water Home Treatment Devices
Water is the only liquid used in human eating which presents different production and transportation processes. All the alimentary liquids, in fact, need production and sanification processes in controlled environments a...
Calculation of Expansibility Factor of Gas at Its Flow Through an Orifice Plate with Flange Pressure Tappings
The values of expansibility factor of gas were defined more accurately based on the values obtained by Seidl in CEESI using the equation of mass flowrate and on the basis of experimental data (differential pressure acros...
Influence of Parameters of Induction Motor-Centrifugal Pump Units with Hydropaths Connected in Series on their Modes
Using the mathematical model of the pump station power supply system in steady-state modes developed by the author, the influence of the parameters of induction motor-centrifugal pump units with in-series-connected hydro...
Construction of Empirical Models of Complex Oscillation Processes with Non-Multiple Frequencies Based on the Principles of Genetic Algorithms
A method for constructing the empirical models of complex processes has been developed on the basis of genetic algorithms which, compared to the inductive method of self-organization of models, significantly reduces comp...
Digital Complex for Modeling Processes in Electric Circuits with Protection and Automatic Devices
The developed digital complex for modeling electromechanical and electromagnetic processes in electric circuits of any configuration with electromagnetic devices, control devices, synchronous and asynchronous motors incl...