Simulation of temperature field in a partially delaminated thermal barrier coating
Journal Title: Вісник Тернопільського національного технічного університету - Year 2015, Vol 78, Issue 2
Abstract
The problem of determining temperature in a thin partially delaminated thermal barrier coating is considered taking into account the convective heat exchange with the surrounding environment at the front and end surfaces of the coating and the imperfect thermal contact with the base, which is modeled by thermal resistance. In view of deterioration of heat exchange between the base and the coating in the separation region, thermal resistance in this region is assumed to be greater than thermal resistance in the regions of full adhesion. The heat-transfer coefficient at the front surface of the coating is coordinate-dependent. With the use of the propositions of heat conduction in thin elements of constructions, a model for describing temperature field in a partially delaminated coating, caused by the difference between the temperatures of the base and the surrounding environment, is proposed. Utilizing the method of variation of constants, an approach for reducing the heat conduction boundary value problem for the coating to a system of Fredholm integral equations of the second kind for the functions that are linear combinations of the integral characteristics of the coating temperature (the mean temperature and the temperature moment) and the temperature of the surrounding environment and the base is developed. A numerical scheme for solving the system of integral equations is constructed using the quadrature method. In particular, Simpson's quadrature formulae are utilized to evaluate the integrals, and the system of Fredholm integral equations of the second kind is reduced to a system of linear algebraic equations. The results of numerical analysis of temperature distribution at the front surface of the coating and at the interface between the coating and the base are given for the case of thermal insulation of the end surfaces and the case of convective heat exchange with the surrounding environment at them. The distributions of the mean temperature and the temperature moment are examined for various values of thermal resistance in the separation region. It is revealed that an increase in thermal resistance leads to a significant temperature perturbation at the front surface as well as at the interface between the coating and the base. However, the value of the temperature moment in the separation zone is slightly decreasing in comparison with the case when the delamination does not occur at the interface between the coating and the base.
Authors and Affiliations
Bogdan Khapko, Rostislav Martynyak
Keywords
Related Articles
- EP ID EP571377
- DOI -
- Views 50
- Downloads 0
Analytical and applied model of the process of the cut vegetable components feeding to the screw conveyor of the top gathering module
The article deals with the analytical and applied model of feeding of cut vegetable components from root crops to the screw conveyor, the analysis of the theoretical level and possible limits of the change of technologic...
Methodology of development and architecture of ontooriented system of electronic learning of Chinese image medicine on the basis of training management system
The work is devoted to solving the problem of the lack of a qualitative electronic training course on Chinese Image Medicine and analysis of the main tasks related to the sphere of knowledge management: content preparati...
Technology in developing the innovative element base in the form of spherical hinges for the spatial drives system
The technological process of manufacturing the effective spherical joints of the spatial drive systems was developed. It is based on the formation of spherical surfaces of the hinge using the polymer-metal composite. The...
Optimization of the sports ground illuminating devices distribution
Requirements to the sports ground illumination have been analyzed. As the result of the analysis of the latest publications dealing with the optimization of the illumination-technological parameters of the sports grounds...
Corrosion fetigue features of carbon 35 (0.35c) steel in presence of oak chips extract
It is established that corrosion protection efficiency of medium carbon steel in water inhibited by oak chip extract grows with increasing of inhibitor concentration. The degree of corrosion protection reaches 85 – 97% u...