Simulation of the Gas Transportation through Pipes Inspected by Intelligent Robots
Journal Title: RECENT - Year 2009, Vol 10, Issue 26
Abstract
In this paper, the authors have created the visual images of transport gas nets, by using the Delphi visual programming medium, as qualitative simulation tool. The authors show that using this tool, one can obtain a priori, in the design stadium, the information about the state of the transport pipe. In a real environment these information must be confirmed using the physical measurements and by the examination of the state of transport pipe by the intelligent robots inspectors. During the inspection, the robot stays in contact with pipe’s wall and the robot motion path will be imposed by the pipe profile and the pipe route. If the robot discovers the cracks in the pipe wall, this will signalize the defect zone. In this paper, for testing the robot motion control algorithms in the environment with constraints, the authors propose the using of the behavioral simulation method.
Authors and Affiliations
Mariana FRATU, Aurel FRATU
Command and Control of an Experimental Model of a Mechanical Vulcanizing Press
Research conducted at Transilvania University of Brasov, Romania, was orientated to exploring the possibilities of designing mechanical vulcanizing press with same or higher performances of hydraulic vulcanizing presses...
Research of Orthopaedic Ceramic Prostheses Personalized
The pre-sintering method can offer a suitable solution for manufacturing of orthopaedic prostheses that are usually difficult to do. This paper presents the results of some experiments on manufacturing of orthopaedic pro...
Experimental Research Regarding Wood Insulated Exothermic Feeders
The paper presents research results regarding the possibility to increase the feeder efficiency by applying sand cores with wooden panel insertions onto the feeders. The wooden panels are inserted in the side walls and t...
Research on the Efficiency of Thermally Insulated Feeders
The paper discusses the influence of thermal insulation of feeders on the solidification of cast parts. The employed method was computer simulation of alloy solidification. Several casting variants were analyzed involvin...
Requirements for Ground-Based Air Defense Integrated Systems
The Air Defense (A.D.) represents a really support for any military operations. Between the A.D. assets, Surface-to-Air Missiles are the most important features in endowment, allowing dealing the rapid evolution of enemy...