Single Pile Settlement and Load Transfer Mechanism due to Excavation in Silty Clay
Journal Title: Engineering, Technology & Applied Science Research - Year 2018, Vol 8, Issue 1
Abstract
In densely built areas, development of underground transportation system often involves excavations for basement construction and cut-and-cover tunnels which are sometimes inevitable to be constructed adjacent to existing piled foundations. In order to gain new insights into single pile responses (i.e. settlement and load transfer mechanism) to an adjacent excavation in saturated silty clay, a three-dimensional coupled- consolidation numerical analysis is conducted in this study. An advanced hypoplasticity (clay) constitutive model with small-strain stiffness was adopted. A linear increase in pile settlement was observed due to excavation-induced stress release. This is because part of the pile is placed within the boundaries of a major influence zone due to excavation-induced ground movement. Based on a settlement criterion, apparent loss of pile‘s capacity is 14%. A maximum bending moment of about 350 kNm is induced in the pile with the maximum deflection of 28 mm. In addition, mobilisation of shear strength at the pile-soil interface was found to be a key factor governing pile-soil-excavation interaction. During excavation, a downward load-transfer mechanism in the piles can be identified.
Authors and Affiliations
M. A. Soomro, K. F. Memon, M. A. Soomro, A. Memon, M. A. Keerio
Keywords
Related Articles
- EP ID EP155969
- DOI -
- Views 226
- Downloads 0
Constellation and Mapping Optimization of APSK Modulations used in DVB-S2
This article represents the algorithms of APSK constellation and mapping optimization. The dependencies of the symbol error probability Ps on the parameters of the 16APSK and 32APSK constellations are examined and severa...
A Novel Approach for Arabic Text Steganography Based on the “BloodGroup” Text Hiding Method
Steganography is the science of hiding certain messages (data) in groups of irrelevant data possibly of other form. The purpose of steganography is covert communication to hide the existence of a message from an intermed...
Rectangular Strain-Rosette Method for Measuring the Mode I Stress-Intensity Factor KI and T-stress
In this paper, a new experimental technique for measuring Stress Intensity Factor (SIF) and T-stress under mode I loading is developed. The expressions of the normal and tangential strains close to the crack tip are give...
Air Distributor Designs for Fluidized Bed Combustors: A Review
Fluidized bed combustion (FBC) has been recognized as one of the suitable technologies for converting a wide variety of biomass fuels into energy. One of the key factors affecting the successful operation of fluidized be...
Chaotic Behavior in a Flexible Assembly Line of a Manufacturing System
The purpose of the present work is to study the chaotic behavior in a flexible assembly line of a manufacturing system. A flexible assembly line can accommodate a variety of product types. Result analysis is performed to...