Stability Analysis of Steel Columns with Fixed-Free Ends under Axial Compression: Uniform and Non-Uniform Square Hollow Sections
Journal Title: Journal of Civil and Hydraulic Engineering - Year 2024, Vol 2, Issue 2
Abstract
This study investigates the stability of steel columns subjected to axial compression, focusing on square hollow sections (SHS) with both uniform and non-uniform cross-sections. The stability of fixed-free end SHS columns with uniform cross-sections was initially verified using analytical equations. To obtain the critical load and design buckling resistance for each SHS column, Finite Element Analysis (FEA) was employed. The results indicate that while analytical equations can validate the stability of uniform SHS columns, they are insufficient for columns with non-uniform cross-sections. Consequently, the FEA emerges as a robust alternative for analyzing columns with varying cross-sections along their length. This study highlights the necessity of numerical methods for verifying the stability of structurally complex columns, such as those with perforations for mechanical and electrical applications. The finite element model was validated and applied to non-uniform cross-section columns, providing insights into the stability of these columns under practical conditions. This research aims to offer an alternative analytical approach for structural engineering applications where column stability is critical, especially for non-uniform cross-sectional designs that facilitate handling processes in various engineering scenarios.
Authors and Affiliations
Elza M. M. Fonseca
Keywords
Related Articles
- EP ID EP738919
- DOI https://doi.org/10.56578/jche020204
- Views 37
- Downloads 0
Long-Term Aging of Recycled Asphalt Pavements: The Influence of Meteorological Conditions on Bitumen Properties Over 16 Years
The reuse of Reclaimed Asphalt Pavement (RAP) in road construction has become increasingly prevalent due to its potential environmental and economic benefits. The aging characteristics of RAP, particularly the degradatio...
Designing Induced Joints in RCC Arch Dams for Enhanced Crack Prevention: A Contact Unit Simulation and Equivalent Strength Theory Approach
Decades of engineering practice have substantiated that the implementation of construction joints is a pivotal method for mitigating dam cracking. The integration of various joint types, notably transverse and induced jo...
Investigating the Properties and Determinants of Underwater Anti-Dispersive Cementitious Soil with Kaolin: An Experimental Approach
Pile foundations, as one of the main foundation forms for bridges and offshore wind power structures, are prone to scour pits around them under the long-term action of water flow, leading to a decrease in bearing capacit...
Comparative Analysis of 1D and 2D Modeling Approaches for Scour Depth Estimation: A Case Study of the Kelanisiri Bridge, Sri Lanka
The scouring process, characterised by the erosion of sediment around bridge piers due to fluid flow, poses a significant risk to the structural integrity of bridges. Scour depth, defined as the vertical distance from th...
Load Testing and Damage Analysis of Reinforced Pre-stressed Concrete Continuous Box Girder Bridge
Pre-stressed concrete continuous box girder bridges are widely used in bridge engineering due to their excellent mechanical properties. However, as the service life of the bridge increases and heavy vehicles exert additi...