STATEMENT OF THE PROBLEM OPTIMAL CONTROL THE HARDNESS OF THE STEEL PRODUCED BASED ON THE MODEL OF TAKAGI-SUGENO-KANG
Journal Title: Современные информационные технологии и ИТ-образование - Year 2018, Vol 14, Issue 2
Abstract
This study discusses the problem of mathematical modeling of complex technological systems under uncertainty to obtain the most optimal parameters in the management of the production process in the applied field - metallurgy. In the offered approach one of the most important tasks of management of technological process of steel smelting is considered: maintenance of the set hardness (calcification) of the steel distributed on depth of the smelted product. To minimize the inevitable errors associated with the expert choice of chemical composition, improve the management efficiency and the quality of the produced steel, it is proposed to apply the system of fuzzy production rules Takagi-Sugeno-Kanga (model TSK), based on the modeling of the dependence "composition-hardness". Application of this model will also allow to optimize the choice of the chemical composition of the steel in the conditions of stochasticity of the parameters of the regression models. In addition, in the study of the steel production process there is a need to solve the inverse problem - the determination of the chemical composition of the steel produced at a given hardness value. The proposed model of TSK based on fuzzy production rules for steel smelting prediction and control is presented in matrix form, so one of the possible ways to solve the control problem is to solve the corresponding matrix equation. At the same time, on the basis of experimental data, a significant shift in the estimates of the values of chemical elements was revealed. Therefore, governance must be based on an optimization approach. The proposed formulation of the optimization problem will develop an algorithm for solving the problem of optimal hardness control on the basis of the TSK model, characterized by the ability to automatically determine the required chemical composition of steel by a given distribution of its hardness. In addition, the developed model TSK using the optimal control problem will eliminate errors in determining the calculation model, as well as to determine the hardness of steel for the chemical composition does not fully correspond to a certain set of allowable intervals of changing the mass fractions of chemical elements.
Authors and Affiliations
Evgenia Kabulova, Akim Bondarchuk
Keywords
Related Articles
- EP ID EP519272
- DOI 10.25559/SITITO.14.201802.389-396
- Views 113
- Downloads 0
ALIEN AND SUPERCOMPUTER TITAN INTERACTION TECHNOLOGY
The next launch of the LHC involves using much more resources than GRID can provide. To solve this problem, ALICE is engaged in a project to expand the existing computing model in order to include additional resources in...
POVERTY LEVEL EVALUATION ON THE BASIS OF THE FUZZY LOGIC FORMALISM
In this article the problems are considered connected with poverty rate evaluation on the basis of a fuzzy logic formalism on the example of the elderly population. A set of fuzzy variables and parameters of the membersh...
DIGITAL RAILWAY -ERTMS, BIM, GIS, PLM AND DIGITAL TWINS
This article is devoted to the development of the digital railway and the various technologies that are used in this process. In recent years, rail transport in many countries has increased more than several times, which...
IT-TECHNOLOGIES IN THE PROBLEMS OF IMPROVING EFFICIENCY WITH THE ASSOCIATED START AND SEPARATION OF THE MICRO SATELLITE ON-BOARD SPACE APPARATUS
Recently, the study of the near and far space with the help of small spacecraft has become more important. In this regard, we can definitely talk about the whole industry of small space technology, the problems of its cr...
EVALUATION OF EXPERT JUDGEMENTS CONSISTENCY WHEN CONSTRUCTING A MEMBERSHIP FUNCTION OF FUZZY SET USING THE METHOD OF LEVEL SETS
The article deals with one of the expert methods for construction of a membership function of fuzzy set – method of level sets, developed by R. Yager. The feasibility of improving of this method, by adding a procedure fo...