STREET LIGHT GLOWS ON DETECTING THE VEHICLE MOVEMENT USING ARDUINO UNO
Journal Title: International Journal of Electrical Engineering & Technology (IJEET) - Year 2019, Vol 10, Issue 3
Abstract
This paper proposes how street light can be controlled in the presence or absence of vehicle to reduce the wastage of energy. The proposed work is accomplished by using Arduino UNO and sensors that will control the electricity based on night and object's detection. Meanwhile, a counter is set that will count the number of objects passed through the road. The beauty of the proposed work is that the wastage of unused electricity can be reduced. The aim of this project is to design a street light control system using Arduino UNO, which automatically turns on or off the street lights by detecting the movement of vehicles. The working of the project is explained here. When there is not any vehicle in front of the IR sensor module, the receiver can’t get any infrared signal So the circuit remain in open loop condition and the lights are in off condition. When there is any vehicle in front of the IR sensor module, the receiver get the infrared signal. So the circuit is in close loop condition and the lights are in on condition with respect to the IR module. If the car blocks the first IR sensor, the first three LEDs are turned ON by the microcontroller. As the car moves forward and blocks the second IR sensor, the corresponding next three LEDs will be turned ON and the first LED of the previous set is turned OFF. The process continues this way for all the IR Sensors and LEDs
Authors and Affiliations
RITAM SAHU, MOYURI SHIL, RIMPI DATTA, PIYU SARCAR
Keywords
Related Articles
- EP ID EP46592
- DOI 10.34218/IJEET.10.3.2019.003
- Views 191
- Downloads 0
A STATIC NON-LINEAR CONTROLLED BRIDGE TYPE FAULT CURRENT LIMITER FOR TRANSIENT STABILITY AUGMENTATION OF MULTI-MACHINE POWER SYSTEM
This paper implements Fault Current Limiting (FCL) requirements and proposed a calculation method to determine the required dc reactor value, for the purpose of the converter continuous operation during dc faults. On t...
MINIMIZE POWER LOSS USING PARTICLE SWARM OPTIMIZATION TECHNIQUE
This paper presents the solution of optimal power flow (OPF) using particle swarm optimization (PSO). The objective function is minimize power loss by adjustment the power control variables and at the same time satisfy...
HYBRID ENERGY MANAGEMENT SYSTEM OF EV USING GRID TO VEHICLE SYSTEM
To implement the Electric Vehicle-Energy Storage System (EV-ESS) to control of battery charging and discharging and control between the power generation and load. The proposed system implement a interlinking converter,...
MULTI AREA FREQUENCY AND POWER RESPONSE OF HYBRID POWER SYSTEM
This paper proposes the implementation of intelligent control technique to design standalone controllers based on Adaptive Neuro Fuzzy inference System (ANFIS) for Load Frequency Control (LFC). The proposed controllers...
OPTIMAL ALLOCATION OF RENEWABLE DISTRIBUTED GENERATION WITH LARGE PENETRATION TO MITIGATE POWER QUALITY ISSUES
The intervention of DG’s in the electrical network has increased remarkably which has led to the requirement of optimally allocating them in the system. They should be allocated with an optimal size and appropriate loc...