STRENGTH DETERMINATION OF ALUMINIUM AT DIFFERENT TEMPRATURES
Journal Title: International Journal of Computer Science and Management Studies (IJCSMS) www.ijcsms.com - Year 2011, Vol 11, Issue 2
Abstract
The necking of specimen is specifically related to the decrease in cross section when specimen is subjected to tensile strength greater than ultimate tensile strength (UTS). The strain distribution no longer hold uniform along the gauge length. As the tensile load is applied, due to which length of specimen increases but there is decrease in cross section. The present work laid stress on determining the tensile properties from stress strain curve by tensile testing of aluminium (specimen) at different range of high temperature The tensile testing is carried out on INSTRON static series 600 KN. The specimens were tested at different range of high temperature (Room Temperature - 325 degree Celsius). True Stress and strain is calculated using the engineering equation. Using the values of true stress and true strain the true stress strain curve was plotted. The polynomial equation is obtained from each specimen curve. The graph is plotted between temperature and ultimate tensile strength (UTS) which indicates that the ultimate tensile strength decreases with the increase in temperature.
Authors and Affiliations
Deepak Sharma , Ashu Yadav , Prof. Nabi Hasen
Keywords
Related Articles
- EP ID EP92897
- DOI -
- Views 141
- Downloads 0
SECURITY THREATS IN WIRELESS SENSOR NETWORKS
Wireless Sensor Network (WSN) is an emerging technology that shows great promise for various futuristic applications both for mass public and military. The sensing technology combined with processing power and wireless...
Reliability Investigation for a Fleet of Load Haul Dump Machines in a Mine
The recent deployment of complex and capital intensive equipment in mines has resulted in increased interest in the maintenance and operational reliability of these equipments. This is because random equipment failure ha...
Data Compression in Wireless Sensor Network
Wireless sensor networks are resource constrain. They are limited power supply, bandwidth for communication,processing speed and memory space. The possible way of achieving maximum utilization of those resources is apply...
Effect of Line-Width Variation in Radio over Fiber System Based On Optical Single Side Band for Short Haul Communication
Carrier to Noise Ratio (CNR) has been investigated for radio over fiber systems including the effects of variation in the RF oscillator linewidth in this paper. Optical Single sideband signal is studied as it has tolera...
Data warehousing and Phases used in Internet Mining
In this paper, we describe the data warehousing and data mining. Data Warehousing is the process of storing the data on large scale and Data mining is the process of analyzing data from different perspectives and summar...