Structural Analysis and Mass Optimization of Mobility Walkers Using Lightweight Polymer Matrix Composites
Journal Title: Precision Mechanics & Digital Fabrication - Year 2024, Vol 1, Issue 3
Abstract
This study investigates the structural performance and mass optimization of traditional walkers by comparing aluminum alloy and polymer matrix composites (PMCs) through advanced finite element analysis (FEA) using the ANSYS simulation platform. The FEA results reveal that peak stress, reaching 251.9 MPa, is concentrated at the front wheel support region, highlighting a critical area prone to structural vulnerability. Special attention is required to address potential mechanical limitations in key zones, such as the rear suspension, to prevent premature failure. Comparative analysis demonstrates that walkers fabricated from carbon-epoxy PMCs offer superior stiffness, reduced weight, and enhanced resistance to deformation compared to aluminum alloy counterparts. Notably, under descent conditions, the maximum elastic strain in the carbon-epoxy walker reaches 0.00399 mm/mm, localized in the front wheel support area, as indicated by the simulation results. These findings underscore the significant role of material selection in improving structural integrity and performance across varying operational conditions. The equivalence of stress and strain energy distributions further substantiates the advantages of composite materials over conventional alloys, suggesting that PMCs enable enhanced durability without compromising weight efficiency. The research emphasizes a human-centred approach, aligning material performance with user needs to develop mobility aids that offer long-term structural reliability. Beyond addressing immediate structural concerns, the findings lay the groundwork for future studies involving optimization algorithms and the exploration of alternative composites for assistive devices. The study provides valuable insights into stress distribution, deformation behaviour, and mechanical response, promoting continuous innovation in the design and development of mobility aids.
Authors and Affiliations
Okta Bani, Bharat Kumar Humagai
Keywords
Related Articles
- EP ID EP752485
- DOI https://doi.org/10.56578/pmdf010302
- Views 36
- Downloads 0
Automated Alignment of U-Notch in Iron Caps Using Machine Vision: A System for Suspended Insulators
In the automated production line for suspended insulators, precise alignment of the U-shaped notch in iron caps is crucial for effective gluing. This study introduces a system based on machine vision that automates the a...
Comparative Analysis of Aerodynamic and Structural Performance of Aircraft Wings Using Boron Aluminum Metal Matrix Composites and Aluminum Alloys: A CFD and FSI Approach
The aerodynamic and structural performance of aircraft wings constructed from Boron Aluminum Metal Matrix Composites (Boron Al MMC) and conventional aluminum alloys has been comprehensively evaluated through Computationa...
Design and Performance Analysis of a Torque-Based Optical Fiber Flow Sensor
A torque-based optical fiber flow sensor has been designed and experimentally tested to assess its potential for fluid flow measurement. The sensor utilizes an optical fiber strength modulation principle to achieve flow...
Impact of Oil Film Dynamics on the Performance of Aeroengine Plain Bearings
This investigation addresses the issue of premature failure or damage to bearing components in aeroengines, which often results from the release of dissolved gases in the lubricant due to environmental pressure changes d...
Digital Transformation in Manufacturing: Enhancing Competitiveness Through Industry 4.0 Technologies
The digitization of production processes in the manufacturing sector represents a pivotal transformation that fundamentally reshapes how companies achieve productivity, make informed decisions, and secure a competitive a...