STRUCTURAL ANALYSIS OF COMPOSITE MATERIAL HELICAL GEAR UNDER DIFFERENT LOADING CONDITION
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 30, Vol 5, Issue 6
Abstract
Gearing is one of the most critical components in a mechanical power transmission system, and in most industrial rotating machinery. In recent years it is required to operate machines at varying load and speed. Gear teeth normally fail when load is increased above certain limit. Therefore it is required to explore alternate materials for gear manufacturing. Composite materials provide adequate strength with weight reduction and they have emerged as a better alternative for replacing metallic gears. In this work an attempt has been made to replace the metallic gears of steel alloy with the composites . The composites consider were the Aluminium Silicon carbide composite Carbon fiber epoxy composites and carbon fiber silicon carbide ceramic composite . Efforts have also been carried out for modelling of the transmittiing power gear assembly on creo 3.0 and fem based structural behaviour of different material were studied. Ansys 14.0 is used the analysis tool in the present work to detrmine the total deformation , von misses stress and the natural frequencies at various mode. Composite gears offer improved properties over steel alloys and these can be used as better alternative for replacing metallic gears.
Authors and Affiliations
Mohit Singh
Keywords
Related Articles
- EP ID EP143872
- DOI 10.5281/zenodo.55629
- Views 64
- Downloads 0
Statistical Optimization of Process Parameters for Dye Biosorption onto Biomass
In the present study, sorption of reactive azo dye, Blue H_3 R from aqueous solution on an efficient, economically biomass (sewage sludge) was investigate. Batch experiments have been carried out to find the effec...
CHARACTERIZATION OF PEO CONDUCTING POLYMER ELECTROLYTE COMPLEXED WITH KNO3 ALKALI SALT AND NB2O5 NANO-FILLER
Conducting solid phase polymer electrolyte (SPE) films were synthesized using solution casting technique. In the present study the polyethylene oxide [PEO] complexed with potassium nitrate [KNO3] as alkali salt gr...
A Systematic Study of Segmentation Methods
This paper provides a Systematic study of segmentation methods for detection of kidney tumor using Computed Tomography images. There are large numbers of CT image segmentation algorithms are available, CT image s...
A REVIEW: IMPROVED NETWORK MONITORING AND ANALYSIS BY MULTICHANNEL PACKET-ANALYSIS SYSTEM (MPAS)
Today we are seeing that computer networks are increasing in their sizes very rapidly. Number of its user increased in past few years and traffic flows in networks also increased, so it’s very important to mon...
Performance of Capacitor Supported SRF based DSTATCOM in Three-Phase Four-Wire Distribution System under Linear and Non-Linear Load Condition
In this paper, the four-leg voltage source converter (VSC) with capacitor in its parallel, was functioned as a distribution static compensator (DSTATCOM). In three-phase four-wire distribution system, DSTATCOM was...