STRUCTURAL ANALYSIS OF THERMAL FUEL FUEL PROPERTY ON THE EXAMPLE OF SOLID BIOFUEL
Journal Title: Енергетика і автоматика - Year 2018, Vol 0, Issue 5
Abstract
One of the most important indicators determining the quality of biofuels, and hence their cost, is their calorific value. Calorific value is determined by the higher calorific value (higher calorific value - PTS) or lower than the heat of combustion (lower calorific value - NTS). The purpose of the work is to study the structure of the calorific value of the fuel and the influence of the component parameters on its magnitude. The theoretical and experimental component of the research of the structure of the calorific value was carried out on a calorimetric installation for the determination of the calorific value of solid and liquid fuel according to GOST 147 - 95 (ISO 1928 - 76), GOST 10062 - 75, GOST ISO 1928: 2006 It is assumed that the energy is formed by combustion dry ashless mass. Experiments have shown that the calorific value is largely determined by the level of humidity, since evaporation of water requires energy, namely, the calorific value of solid biofuels, depending on the humidity, can vary from 20 MJ/kg at a moisture content of 0 % to 1.5 at humidity 90 % .
Authors and Affiliations
В. Є. ВАСИЛЕНКОВ, А. Б. Грабарчук
INFLUENCE OF MAGNETIC FIELD ON QUALITY OF RYE SEEDS
The aim of the work was to study the influence of the magnetic field on the sowing quality of rye seeds during pre-sowing treatment On the basis of the conducted researches it is established that the change in the sowing...
ENSURING STABILITY COMPATIBLE WORK OF THE DIFFERENT ASYNCHRONOUS MACHINES IN THE AUTONOMOUS ELECTROMECHANICAL COMPLEX
An autonomous electromechanical complex is a partial version of an autonomous electric power system with electric machines as a source and consumer of electricity. Realization of idea of replacement of difficult synchron...
INVESTIGATION OF ASYNCHRONOUS ELECTRIC POWER FREQUENCY CONTROL FAN BUS
About 60 % of the cost of electricity in the industry accounted for electric motors. At the same time, a significant part of these costs falls on the drive systems of fans, compressors, pumps and other installations with...
INVESTIGATION OF THE INFLUENCE OF MOISTURE MOISTURE ON ITS CORROSIVE AGGRESSION
The results of studies on the determination of soil electrical resistivity as a function of soil moisture are presented, which is an important factor in soil corrosion of metals. On the basis of classification of corrosi...
INVESTIGATION OF THE OPPORTUNITIES OF APPLICATION OF ULTRASONIC CONTROL TECHNOLOGIES FOR REMOTE MONITORING OF CHARACTERISTICS OF FROZEN DEPOSITS ON WIRES OF OVERHEAD TRANSMISSION LINES
The purpose of the research is to develop a device for remote monitoring of the characteristics of ice-and-cloud-bearing deposits on a TL wire based on the use of ultrasonic testing technologies that is devoid of the abo...