STRUCTURE, PHASE COMPOSITION, MECHANICAL PROPERTIES OF COMPOSITE MATERIALS BASED TITANIUM ALLOY Ti + 10Mo AND SYNTHESIZE FILMS OF FRICTION
Journal Title: Проблеми тертя та зношування - Year 2016, Vol 70, Issue
Abstract
The phase composition, structural state and some of the mechanical properties (HTІ - Hardness, H / Er - normalized hardness, ε - elastic strain and σ - the elastic limit) of composite materials (KM1 Ti + 10Mo + MoS2, KM2 Ti + 10Mo + MoS2, KM3 Ti + 10Mo + CaF2, KM4 Ti + 10Mo + BN) and secondary films synthesized at the surface of the friction material when mated with steel in air at 45 V = 6 and 15 m / s under a pressure of 0.8 MPa. The structure of composite materials formed on their surfaces secondary lubricating films evaluated as nanocrystalline. This structure provides a material based on titanium alloys is relatively low coefficients of friction and low wear.
Authors and Affiliations
A. G. KOSTORNOV, O. I. FUSCHYCH, V. F. GORBAN, T. M. CHEVYCHELOVA, M. V. KARPETS
Keywords
Related Articles
- EP ID EP185783
- DOI -
- Views 50
- Downloads 0
FORMATION OF TRIBOTECHNIKAL PROPERTIES OF PLASMA COATINGS ON STEEL 12C-Cr18-Ni10-Ti BY LASER TREATMENT
The questions of the strength of adhesion of plasma coatings with the base and their durabil-ity. These ways оf improving the quality of such coatings by melting coating and thin surface layer or base their repeated cycl...
CREATING SPECIFICS OF COMPOSITE COATINGS, HARDENED BY CARBON NANOTUBS
The specifics of creating of composite coatings, hardened by carbon nano-tubs, and existing approaches to an interface interaction assessment in bulk composites with the febrile form hardened are considered. Feature of s...
EFFECT OF SURFACE ATOMS SEGREGATION ON PROPERTIES EUTECTIC ALLOYS OF Fe-Mn-C-B-Si DOPED Cr FOR USE ON WORK ITEMS FIRE EQUIPMENT
In work research segregation atoms friction eutectic alloys of Fe-Mn-C-B-Si alloy Cr. Coatings applied by plasma deposition using powdered alloys. Discovered segregation of atoms C, B and Si eutectic alloy surface. Appli...
INCREASING OF WEAR RESISTANCE OF CUTTING EDGES BY COMBINED TREATMENT METHOD
The wear resistance of the operating surfaces of the cutting parts that been restored by com-bined treatment method which includes preliminary chemical-thermal saturation in powder mixtures and electric contact depositio...
GENERALIZATION FOR THE DEGRADING STATE MAXIMAL PROBABILITY IN THE FRAMEWORK OF THE HYBRID-OPTIONAL ENTROPY CONDITIONAL OPTIMALITY DOCTRINE
The paper theoretically considers the possibility of the multi-optional hybrid func- tions entropy conditional optimization doctrine applicability with the purpose of dis- covering the substantiated reasons for the degra...