STUDIES ON PHOTOSENSING AND PHOTOLUMINESCENT PROPERTIES OF SPRAY PYROLYZED CDSSE THIN FILMS
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 30, Vol 4, Issue 7
Abstract
Cadmium Sulpho selenide (CdSSe) thin films were prepared by chemical spray pyrolysis technique. Cleaned non conducting glass slides were used as substrates. The precursors used were Cadmium chloride and selenourea for deposition. Various parameters to synthesize the CdSSe thin films were the surface temperatures, distance between surface nozzle and substrate heater and the pressure were optimized initially out of which substrate temperature was kept constant at 2750 C + 50 C, distance between spray nozzle and heater was kept 27 cm. The as deposited thin films of CdSSe were annealed in the nitrogen atmosphere for half an hour before characterization. The nitrogen annealed thin CdSSE films were studied for Photosennsing and Photo luminescent properties. Present investigation describes the effect of increase in incident intensity of li8ght on the CdSSE thin films. The light intensity was varied by using the incandescent bulb, maximum photosensitivity of CdSSe thin films was found to obtained 42000.In Photoluminescence study the peaks observed in were in close agreement with the reported peaks of the photoluminescence spectra for CdSSe thin films.. The blue shift observed in PL emission spectra corresponds to nanocrystalline effect. This indicates that the nitrogen annealed CdSSe thin films Show the best photosensitivity as well as photo luminescent in nature
Authors and Affiliations
L. A. Patil
Keywords
Related Articles
- EP ID EP89653
- DOI -
- Views 122
- Downloads 0
The Screen of the Future E-Paper
E- paper is portable, re-useable and storage display device. it works by using E-ink technology. it is not backlit . Epaper is two types i.e., non-flexible and flexible. flexible displays uses plastic substrates a...
Study of Mechanical and Chemical Properties of Biodegradable Fibers before and After Alkali Treatment
Fiber reinforced composites offer varied advantages in various applications. Today fiber composites aeronautically used in such diverse applications as automobiles, aircraft, space vehicles, offshore structures, c...
DETECTION OF BEARING FAULT USING VIBRATION ANALYSIS AND CONTROLLING THE VIBRATIONS
In today’s world we were more concerned with reducing the cost of failure and maintenance in any industry as per schedules of each machine and determined by the exact running condition of each major machinery comp...
A COMPACT G-SHAPED DUAL-BAND ANTENNA FOR WLAN/WI-MAX AND RFID APPLICATIONS
In this paper a G-shaped dual-band monopole antenna with a shorted strip fed by a coupling microstrip line for wireless communication in the wireless local-area network (WLAN) band is studied. The proposed antenna...
COMPARATIVE STUDY ON PLANNING, SCHEDULING & RESOURCE ALLOCATION OF A LIVE PROJECT WITH UPCOMING PROJECT OF SAME ASPECT
The Aim of this study is to compare the actual project done with upcoming project in terms of planning, scheduling and resource allocating with respect to TIME & Cost. The actual project was subjected to a fina...