Study of Properties of Al LM-25/SIC fabricated by using Stir Casting Method and Wear Analysis by RSM
Journal Title: International Journal of Advanced Engineering Research and Science - Year 2018, Vol 5, Issue 2
Abstract
Aluminum MMC’s are widely used in various applications because of their higher mechanical and physical properties when compared with their base Al alloy. This paper focuses on the change in mechanical properties of various Al/SiC composites fabricated by using stir casting method. Effect of SiC reinforcement in different Al alloys on mechanical properties like hardness, tensile strength, wear test, percentage elongation, residual stress measurements are discussed in detail. For this purpose various reinforcement of SiC with 0,4,8 percent weight and different particle sizes are considered along with Al alloys. Variations in process parameters of stir casting are also made and taken into consideration.
Authors and Affiliations
Keywords
Related Articles
- EP ID EP507394
- DOI 10.22161/ijaers.5.2.15
- Views 26
- Downloads 0
Adhesive and abrasive wear resistance evaluation of a ABNT 52100 steel from a Stretch Bending Roll coated with WC-Co and NICCr applied by the HVOF Process
The tungsten carbide coatings in the cobalt matrix (WC-Co) and nickel-chromium carbide (NiCCr) are widely used to give greater resistance to abrasive wear to carbon steel. In this work, the possibility of applying these...
Work and Successful Aging Process: An Approach to Family Farming
Working outdoors leaves marks on human bodies that are sometimes lasting. In family farming, workers age by consequence of their exposure and work, reaching older ages with serious physical and health problems. Purpose:...
Sequence Stratigraphic Analysis of the Mauddud Formation, Central Iraq
The Mauddud Formation of central Iraq was deposited within different shallow and deep marine subenviroments on a distally steepend ramp setting, Local tectonism greatly affected the sequence development where the differe...
Evolution of Patient Dose in Chest Radiotherapy Planning
Radiographic image has been used for patient positioning, target localization radiation beam alignment, and subsequent verification of treatment delivery in radiotherapy. Radiographic imaging as all medical use of ionizi...
Payment for Environmental Services - An Example of Sustainable Management
The payment for environmental services presents itself as a potential instrument that promotes the sustainable development, which contributes to the preservation of nature in order to keep the maintenance of environmenta...