STUDY OF THE STRUCTURE OF HEAT-INSULATING MATERIALS BASED ON LIQUID GLASS DEPENDING ON THE AMOUNT OF GAS-FORMING AGENT
Journal Title: Вчені записки Таврійського національного університету імені В. І. Вернадського. Серія: Технічні науки - Year 2018, Vol 29, Issue 6
Abstract
In paper are considered composite foam-materials obtained by chemical foaming of the liquid-glass binder, which monoliths the granular filler also on the basis of liquid glass. The introduction of the granular filler into the liquid-glass composition makes it possible to reduce shrinkage, water absorption, hygroscopicity, improve the strength characteristics of the foam material, and improve him macrostructure. The purpose of this work is to study the process of porisation during the preparation of liquid-glass foam-materials, by studying their macrostructure and phase composition, as well as the kinetics of the foaming process, depending on the type blowing agent. In the course of the research it was found that aluminum powder is the optimal blowing agent. When it is used, the structure restructuring processes are intensively carried out, which contributes to the formation of a uniform, finely porous structure of the foam, leading to an increase in its strength characteristics.
Authors and Affiliations
Т. Э. Рымар
Keywords
Related Articles
- EP ID EP580294
- DOI -
- Views 75
- Downloads 0
PLASMA LIGHTING SYSTEM OF LOW-REACTIVE FUELS FOR HEAT-GENERATING SETS
A system for the plasma lighting of low-reaction fuels for heat-generating sets was developed and investigated, when coal used in the boiler can be used as the ignition and accompanying combustion of fuel. In this study...
REORGANIZATION OF URBAN ENVIRONMENT: STANDARDS, APPROACHES AND TRENDS
The article describes the standards of urban environment reorganization, which are oriented to the effective use of land resources and the load distribution for urban transport infrastructure, a high degree of functional...
INVESTIGATION OF THE PROCESS OF DOUBLE-SIDED GRINDING OF TORCHES OF PUSHERS WITH DIFFERENT DIAMETERS
The three-dimensional geometric modeling of the instruments, the process of removing the abutment and shaping of the two-sided grinding of the pusher blades with different diameters of parts and circles with non-rotating...
FEATURES OF THE PROJECT PORTFOLIO MANAGEMENT SYSTEM INTRODUCTION
The features of the project portfolio management system implementation are considered. The stages of the project implementation project portfolio management system are defined. The three-level system of project office fu...
THE DEVELOPMENT OF METHODS FOR CONDUCTING EXPERIMENTS WITH SCREW EQUIPMENT
The device of anti-filter screens with application of equipment for development of rectangular wells is considered. Use of anti-filter screens to protect buildings and structures from flooding and flooding. The main tech...