Study on the Loss of Strength of Denim-like Knitted Fabrics after Different Washing Treatments
Journal Title: Fibres and Textiles in Eastern Europe - Year 2017, Vol 25, Issue 3
Abstract
Garments produced from denim-like knitted fabrics have been popular for few years because of the many advantages of knitted fabrics. To increase the worn-look denim appearance of these fabrics, washing treatments should be carried out. In this experimental study eight different washing treatments were applied to denim-like knitted fabrics produced from 18 different fleecy yarns. The bursting strength test was applied to the samples obtained and their strength losses calculated. At the end of the study, the most suitable washing treatment for denim-like knitted fabrics was selected, and according to the treatments applied, the best fabric type was chosen.
Authors and Affiliations
Züleyha Değırmencı
Dynamic Characteristic Analysis of the Needle Multi-linkage Mechanism in a Carpet Tufting Machine’s Driving System
In a typical carpet tufting machine, kinematic and dynamic characteristics of the needle multi-linkage mechanism are the important factors affecting the quality of the tufting carpet. For providing a rational basis for m...
Evaluation of Regenerated Bamboo, Polyester and Cotton Knitted Fabrics for Summer Clothing
aaa<br/><br/>
Odbarwianie tkanin typu denim z mieszanek bawełny i kapoku poprzez zastosowanie lasera
Wyniki analizowano i porównywano z wynikami uzyskiwanymi z tkanin denim z bawełny i PET. Wyniki wykazały, że przy zastosowaniu lasera zredukowano intensywność koloru, a wartość K/S została zredukowana przy małych zmianac...
Optimization of the Sizing Process with Grey Relational Analysis
The sizing process is an important one for textile mills and affects the efficiency of the loom machine. In this study, the optimisation of multiple performance characteristics based on the grey relations analysis met...
Ozonizacja – ekologiczna metoda utleniania bawełny
Badano oksydacje celulozy za pośrednictwem ozonu. Jest to metoda uważana jako ekologiczna w porównaniu do innych stosowanych w przemyśle metod oksydacji. Tego rodzaju obróbka stosowana jest w różnego rodzaju procesach ta...