Study Regarding the Good Cavitation Erosion Resistance of a 13Cr-4Ni Stainless Steel used to Manufacture the Components Exposed to Water of the Hydraulic Turbines

Abstract

This paper presents some information regarding the hydraulic turbines respectively the experimental results on cavitation erosion behavior of a 13Cr-4Ni stainless steel used to manufacture the components exposed to water of the Francis, Kaplan and Pelton hydraulic turbines. So, the presented experimental results of this paper highlight the good cavitation​ erosion resistance of the analyzed 13Cr-4Ni stainless steel.

Authors and Affiliations

Marian-Dumitru Nedeloni, Eugen Birtărescu, Lidia Nedeloni, Aurel Băra, Adrian Pellac

Keywords

Related Articles

Dynamic Research of the Flexible Wheel of a Double Harmonic Gear Transmission

The paper presents the results of a dynamic research of the flexible wheel of the double harmonic gear transmission, by determining the state of strain and stress of its wall, in cases the wheel is deformed by a mechanic...

Command and Running of an Experimental Model Vehicle for Covering a Labyrinth Type Runway

The paper presents the command and running of an autonomous vehicle - experimental model – for covering a labyrinth type runway. The command is realized with a Micro Arduino type platform and the running with two mini en...

The Quality Analysis of the Thermal Sprayed Deposited Layers by Electronically Microscopy

The analysis performed by electronically microscopy lead to obtain the experimental data under tabular form. A linear chemical quantitative analysis over a 228.87 μm length was made of on a microscopically image at 250x...

Using Four Model for Predicting the Thermal Conductivity in the Analysis of the Efficacy of Nanofluid in a Double-Tube Heat Exchanger

In the present paper, CuO/Ethylene-Glycol (EG) nanofluid with dp=29 nm and volume fractions of nanoparticles ( ) as coolant has been used in a double-tube heat exchanger to optimize its heat transfer performance under la...

Interpolation of Rainfall-River Orle Discharge for Developing 1.032 MW of Hydropower in Estako-West, Nigeria

Annual rainfall is of great importance to every nation and provides useful data on agricultural, hydrology and hydraulics designs. The research study presents the evaluation of the hydropower potential of river Orle usin...

Download PDF file
  • EP ID EP445129
  • DOI -
  • Views 82
  • Downloads 0

How To Cite

Marian-Dumitru Nedeloni, Eugen Birtărescu, Lidia Nedeloni, Aurel Băra, Adrian Pellac (2017). Study Regarding the Good Cavitation Erosion Resistance of a 13Cr-4Ni Stainless Steel used to Manufacture the Components Exposed to Water of the Hydraulic Turbines. Analele Universitatii "Eftimie Murgu" Resita. Fascicula de Inginerie, 24(1), 235-246. https://europub.co.uk./articles/-A-445129