Studying the physicalchemical properties of alloyed metallurgical waste as secondary resourcesaving raw materials
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 4, Issue 12
Abstract
The properties of the phase composition and microstructure of slags from the alumothermic production of ligatures of refractory elements of various grades, as well as scale of the rapid cutting steel R6M5, were examined for the nature of the presence of alloying elements. This is required to ensure a decrease in the losses of Mo, W, as well as other alloying elements, through sublimation with an increase in the temperature when processing technogenic waste. Phase composition was determined by the method of an X-ray phase analysis. Microstructure was investigated at a scanning electron microscope in a combination with an X-ray microanalysis using the non-reference calculation method for fundamental parameters. It was determined that slags from the alumothermic production of ligatures АHМ-50 and АМVТ consist of CaAl<sub>4</sub>O<sub>7</sub> and compounds AlV<sub>2</sub>O<sub>4</sub> and CrO<sub>2. </sub>That could indicate a certain level of doping the alloy with the refractory elements. The phases of Al<sub>75</sub>Mo<sub>20</sub>W<sub>5</sub> and Mo(Si, Al)<sub>3</sub>, which could be represented by metallic inclusions, were identified in the slag from the MFTA ligature smelting. The phases of scale of steel slag R6M5 are mostly represented by Fe<sub>3</sub>O<sub>4</sub>, Fe<sub>2</sub>O<sub>3</sub> and FeO. In addition, FeWO<sub>4</sub>, MoO<sub>2</sub>, WC, Mo<sub>2</sub>C were found, which is explained by the elevated degree of W and Mo doping. It is not ruled out that a certain part of atoms in the alloying elements, including Cr and V, could exist in the form of replacement atoms in Fe oxides. The microstructure of the examined slags and scale was characterized by the disordered particles of different size and shape. The presence of particles with a relatively high content of alloying elements was detected in scale. Compounds with an elevated susceptibility to sublimation are absent in the studied materials. That leads to a relatively high degree of using the alloying elements and lowers certain restrictions for adding the examined slags to slag-forming mixtures and for temperature limits of melting modes. The use of slags from the alumothermic production, as well as scale of rapid cutting steels, in the charge for the smelting of a doping alloy ensured the extraction of refractory elements and an additional doping of the resulting product
Authors and Affiliations
Stanislav Hryhoriev, Artem Petryshchev, Nina Sinyaeva, Alina Yurchenko, Olexandr Sklyar, Sergey Kvitka, Viacheslav Borysov, Valerii Vlasiuk, Bohdan Tsymbal, Svitlana Borysova
Development of the procedure for integrated application of scenario prediction methods
<p>The paper proposes a procedure for the integrated application of methods for scenario analysis and prediction, represented by graphs of the «tree» type. The task on analysis of risks in software projects has been cons...
Results of research into thermal-technical characteristics of solar collector
<p>We developed a new design of an air solar collector made in the form of an inseparable power unit, which includes a frame with heat-insulated walls, single glazing and a selective surface on its bottom. We defined a n...
Development of techniques to predict and prevent both the effect of xenobiotics and their migration into pig-derived products
<p>This paper reports research into the influence of heavy metals, specifically cadmium and plumbum, on the body of young pigs, and the effectiveness of the preparation to prevent intoxication with heavy metals. Heavy me...
Application of kohonen neural networks to search for regions of interest in the detection and recognition of objects
<p>One of the most effective ways to improve accuracy and speed of recognition algorithms is to preliminary distinguish the regions of interest in the analyzed images. We studied a possibility of application of self-orga...
Research into preservation of broccoli depending on the treatment with antimicrobic preparations before storage
<p>We studied the effect of antimicrobial preparations on the preservation and quality of broccoli. We established that antimicrobial preparations such as Baikal EM-1, 0.5 % citric acid solution, 0.2 % benzoic acid solut...