Studying the Relative Positions of the Teeth of Con-jugated Wheels in the Double Harmonic Trans-mission
Journal Title: Analele Universitatii "Eftimie Murgu" Resita. Fascicula de Inginerie - Year 2017, Vol 24, Issue 1
Abstract
The paper presents a detailed study of the gearing processes in the two stages of the double harmonic transmission. To highlight the graphics of the relative motion of the conjugates teeth it was developed an original calculation program, written in Visual Basic. By running the calculation program, the relative successive positions of the conjugate teeth were viewed and the basic parameters of the gearing were established: the angle profile (), the tooth height (h) and the size of the deformation of the flexible toothed wheel (w0).
Authors and Affiliations
Draghiţa Ianici, Sava Ianici
Keywords
Related Articles
- EP ID EP445109
- DOI -
- Views 91
- Downloads 0
Effects of Pre-Treatment and Temperature on the Quality and Drying Rate of Tomatoes
The effect of pre-treatment and temperature on the quality and the drying rate of tomatos (Lycopersicon esculentus) were studied. A 3× 5 factorial experiment in a randomized complete block (RCBD) design was used. Firm an...
A Comparative Study of Outdoor Lighting System Performance
We analyse in this work three outdoor lighting systems using three types of light sources, in order to determine their performance with respect to outdoor lighting restrictions. The study in this work contributes to gain...
Simple and Multi-collision of an Ellipsoid with Planar Surfaces. Part II: Example
This paper is a complementary one for our previous paper [25]. The collision of the ellipsoid is considered to take place with the main planes of the reference system. In our simulation we obtain the following results: n...
Numerical Study of Shear Stress Around an Ideal Roughness
In EHD lubrication conditions the viscosity of the lubricants increases, occuring at high shear rates of plastic behavior. Previous researches showed that the shear stress in the film thickness of the lubricant may vary,...
Solar Energy as an Alternative to Energy Saving and Pollutant Emissions Reduction
In the paper is analyzed thermal solar systems efficiency from the point of view of energy savings and pollutant emissions concentrations exhausted during these installations operation. For this purpose were taking into...