Substantiation of Boundary Accelerations of Roller Forming Unit Optimal Reversal Mode According to Fourth-Order Acceleration
Journal Title: Проблеми машинобудування - Year 2019, Vol 22, Issue 1
Abstract
In order to increase the reliability and durability of a roller forming unit, we calculated a combined mode of the reciprocating movement of a forming trolley with the reversal according to the fourth-order acceleration with the optimal values of boundary accelerations. In determining the combined mode of the reciprocating movement of the forming trolley with the reversal according to the fourth-order acceleration with the optimal values of boundary accelerations, the criterion of the movement was the criteria action, which is a time integral with the integrand function expressing the “energy” of the unit fourth-order accelerations. We calculated the functions of changing the kinematic characteristics of the forming trolley moving from one extreme position to another, with the functions corresponding to the combined mode of the reciprocating movement of the forming trolley with the reversal according to the fourth-order acceleration with the optimal values of boundary accelerations. It is proposed that the design use a drive in the form of a cam mechanism, for which we constructed a cam profile to provide for the combined mode of the reciprocating movement of the forming trolley with the reversal according to the fourth-order acceleration with the optimal values of boundary accelerations. It is also proposed that the roller forming unit design use a drive from a high-torque stepper motor embedded into the compaction rollers of the forming trolley. The use of the specified drive mechanism in the unit leads to a reduction in the dynamic loads in the drive mechanism elements and, accordingly, to an increase in the reliability and durability of the unit as a whole. The results of the work may further be useful for refining and improving the existing engineering methods for calculating the drive mechanisms of roller forming machines both at the design stages and in real operation modes. Also, the results of the work can be used in designing or improving mechanisms with the reciprocating movement of their actuating elements.
Authors and Affiliations
Viacheslav S. Loveykin, Konstantyn I. Pochka, Nikolay A. Pristaylo, Olga B. Pochka
Keywords
Related Articles
- EP ID EP622727
- DOI 10.15407/pmach2019.01.038
- Views 76
- Downloads 0
Investigation of the Stress Strain State of the Layer with a Longitudinal Cylindrical Thick-Walled Tube and the Displacements Given at the Boundaries of the Layer
This paper proposes an analytical-numerical approach to solving the spatial prob-lem of the theory of elasticity for the layer with a circular cylindrical tube. A cylin-drical empty thick-walled tube is located inside th...
Numerical Analysis of Working Processes in the Blade Channels of the Highly-Loaded Turbine of a Marine Gas Turbine Engine, Using a Refined Finite Element Model
Issues of designing a single-stage high-loaded turbine of a marine gas turbine engine are considered. The object of our research is the aerodynamic characteristics of a viscous three-dimensional turbulent gas stream flow...
Use of computer technology in modernization of head covers for hydraulic turbines of PL20-V-500 type
One of the problems faced by a designer in the modernization of operating generating units is the analysis of the feasibility of ensuring the strength and reliability of turbine parts and components in their further cont...
Aeroelastic Behaviour of Turbine Blade Row in 3D Viscous Flow
This paper presents the results of a numerical analysis of the aeroelastic behaviour of the oscillating blade row of a turbine stage in the 3D flow of viscous gas, taking into account the non-uniform pressure distributio...
Modernization of an experimental installation and a procedure for investigating the anisotropic viscoelastic properties of composite materials at elevated temperatures
The paper describes the process of modernizing the existing installation designed for performing long-term tests of steel and aluminum cylindrical specimens for high-temperature creep with the purpose of conducting the e...