[sub][/sub][sub][/sub]PROPERTIES OF PLASMA AND HVOF SPRAYED COATINGS
Journal Title: Materials Engineering - Materialove inzinierstvo (MEMI) - Year 2013, Vol 20, Issue 1
Abstract
The article compares the properties of plasma and HVOF thermally sprayed coatings obtained by blending the NiCrBSi and Fe2O3 powders. The deposition was performed by means of the Plancer PN-120 and the Diamond Jet guns for plasma spraying and HVOF spraying respectively. The SEM (EDS) method was employed to study the microstructure of the produced coatings. Although the blended powders differ in particle size, shape, and distribution, it is possible to obtain composite coatings with an NiCrBSi matrix containing iron oxides. Except for a different microstructure, plasma and HVOF coatings have a different phase composition, which was examined using the Bruker D-8 Advance diffractometer. Studies of the coatings wear and scuffing resistance showed that an optimal content of Fe2O3 is about 26 % for plasma sprayed coatings and 22.5 % for HVOF deposited coatings.
Authors and Affiliations
Wojciech Żórawski, Otakar Bokůvka
Keywords
Related Articles
- EP ID EP156225
- DOI -
- Views 112
- Downloads 0
MICROSTRUCTURE AND MECHANICAL PROPERTIES DEGRADATION OF CrMo CREEP RESISTANT STEEL OPERATING UNDER CREEP CONDITIONS
In this contribution microstructure degradation of a steam tube is analysed. The tube is made of CrMo creep resistant steel and was in service under creep conditions at temperature 530°C and calculated stress level in th...
TRIBOLOGICAL PROPERTIES OF CrAgN THIN FILMS
CrN and CrAgN thin films were magnetron sputtered onto the substrate made from Vanadis 6 cold work tool steel. The films were examined on tribological properties using a high temperature Pin-on-disc tribometer. Obtained...
Thermal stability of magnesium alloy AZ91 prepared by severe plastic deformation
This paper deals with the thermal stability of ultrafine-grained alloy AZ91 prepared by means of ECAP (Equal Channel Angular Pressing) method. Annealing experiments were conducted isochronally for 30 minutes in the tempe...
Influence of mictrostructure features on the corrosion behaviourof AZ91 alloy in chloride media
The influence of the microstructure of as-cast AZ91 magnesium alloy, which applied to solution annealing treatment and ageing treatment respectively, was evaluated in terms of its corrosion behaviour in 0.1 M NaCl soluti...
The effect of different shot peening intensities on fatigue life of AW 7075 aluminium alloy
In this study the effect of different shot peening intensities, from very light peening with ceramic beads to severe shot peening with high coverage, on the fatigue life of aircraft AW 7075 aluminium alloy was investigat...