Surface Layers and Thermoelectric Properties of Vapor-Phase Condensation LAST Pb18Ag2-xSbxTe20 on Mica
Journal Title: Фізика і хімія твердого тіла - Year 2015, Vol 16, Issue 1
Abstract
The thermoelectric properties of thin films Pb18Ag2-xSbxTe20, obtained by condensation of vapor on the high vacuum on mica substrate are researched. Based on a two-layer model Petrits are founded electrical parameters of surface layers. It is shown that condensates thickness d <1 micron are characterized by improved thermoelectric properties.
Authors and Affiliations
D. M. Freik, B. S. Dzundza, Oksana Kostyuk, V. I. Makovyshyn, R. S. Yavorskiy
Keywords
Related Articles
- EP ID EP310468
- DOI 10.15330/pcss.16.1.93-97
- Views 68
- Downloads 0
Thermodynamics and Crystal Defect Subsystem Zinc Telluride Crystals ZnTe (Review)
On the basis of quantum-chemical methods defined characteristic features zinc telluride crystals: formation energies ΔE, enthalpy of formation ΔH, entropy ΔS, and Gibbs energy ΔG heat capacity at constant pressure Cp and...
Effect of Microwave Radiation on the Band Structure and Electronic Parameters of the Heterosystems with Fullerenes
The results of a complex study of C60/Si heterosystems are presented in this work: the crystal structure and composition of the films, internal mechanical stresses, electronic parameters of the film and the film-substrat...
Thermodynamics of Defects Subsystem of II-VI Crystalsin Gibbs Potential Aproximation: Modeling, Calculation
In example of II-VI ZnTe, CdTe crystals, using method which based on minimizing the thermodynamic potential of the "crystal-pair" as a function of defect concentration, have been calculated equilibrium concentration of p...
Infiltration Kinetics of Cr3C2 by Manganese Cupronickel in the Process of Obtaining Cermets
A theoretical model of infiltration kinetics based on the Darcy's law which was evaluated by W − Lambert function has been established for Cu-Ni-Mn alloy (grade MNMts 60-20-20) during melt infiltration into Cr3C2 porous...
Correlation of Antiwear and Antifriction Properties of Carbon Fiber with Hardness and Roughness of Metal Adjacent Surfaces
Correlations between friction coefficient and intensity of wear of polytetrafluoroethylene – carbon-plastic, derived by CMA-technology, and nature, hardness, roughness (initial and the one that arose in the friction and...