Surface roughness of water-based finishes on aspen poplar wood
Journal Title: Annals of WULS, Forestry and Wood Technology; Zeszyty naukowe SGGW - Year 2017, Vol 98, Issue
Abstract
Surface roughness of water-based finishes on aspen poplar wood. The article deals with the roughness of transparent finishes on the surface of aspen poplar wood. The influences of the type of transparent finish and the thickness of the coating, and also the method of machining of the surface on the roughness of surface of aspen poplar wood were monitored. Aspen poplar wood was machined by one of five different ways of surface machining (milling, sanding, and three ways of pressing). Two types of transparent finish (water-based) were used to make coatings. The finishes were created in three various thicknesses. The surface roughness Ra (arithmetical mean deviation of profile) was measured. Statistical evaluation showed that the type of finish, the thickness of the coating, and also the method of wood machining affected the surface roughness. The roughness of the surface with the thinnest coating was higher than the roughness of the surface with medium thickness of the coating. The surface roughness measured across the wood grain was much higher if compared with the surface roughness measured in direction parallel to the wood grain. The surfaces with the thickness of the coating of 150 μm or more showed reduced surface roughness.
Authors and Affiliations
GABRIELA SLABEJOVÁ, MÁRIA ŚMIDRIAKOVÁ, MIROSLAV MORINGA
Keywords
Related Articles
- EP ID EP339259
- DOI -
- Views 64
- Downloads 0
Прочность соединений древесины приклеиваных в паперечной и продольной плоскости
Прочность соединений древесины приклеиваных в поперечной и продольной плоскости. Целью статьи является нахождение прочностьи соединений древесины приклееваных на тупо состоящий из одной поперечной стороны и з другой...
Spoil Heaps – A New Chance, Not Only for Trees
The current situation in Czech agriculture gives wide possibilities for cultivation of so-called fuel wood species. The wooden biomass serving for obtaining of wood chip is cultivated on the spoil heaps. Mainly the fast-...
The effect of long-time storage of PRF resin on its physical and chemical properties
The effect of long-time storage of PRF resin on its physical and chemical properties. Phenol- resorcinol-formaldehyde resin was subjected to 21-month storage and its physical and chemical properties, as well as bondline...
The effect of thermal treatment of spruce wood on its fire performance characteristics
The effect of thermal treatment of spruce wood on its fire performance characteristics.The focus of this article is the assessment of the effect of thermal treatment of spruce wood (Picea abies L.) on its reaction to fir...
Chemical properties, density and alkalinity of the black liquor obtained from kraft pulping of a selected fast growing poplar line and of reference species
Chemical properties, density and alkalinity of the black liquor obtained from kraft pulping of a selected fast growing poplar line and of reference species. Attempts were made to determine the contents of selected chemic...